Files
With natural finish. Wound wire ferrule provides extra strength to prevent splitting.
This diamond hone file is used for shaping a variety of plastics, metals, glass, stones, and even bone. It is mostly used to dress or reshape abrasive points that have been mounted on the piece.
With natural finish. Wound wire ferrule provides extra strength to prevent splitting.
Hardwood handle with metal ferrule suitable for small files, gravers, etc.
End of wood handle is bored and reinforced. Can be threaded onto tapered spindles so that small wheels, burs, etc. can be used on larger polishing motors. The chuck opens from .085″ to .128″ to fit 3/32″ and 1/8″ mandrels. Overall length 3-1/2″.
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 0
Grobet USA Swiss Pattern Precision file. Used for filing slots in small screws. 0.014″ in thickness. Single cut on both edges – Both sides are safe.
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. Double cut on both sides of coarser end. One side single cut and one side double cut on other end.
Length: 8″ (200 mm)
17/32″ (13.5 mm)
Thickness: 5/32″ (4.0 mm)
Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Hardwood handle with metal ferrule suitable for small files, gravers, etc.
Medium
Overall Length: 5-1/2″ (140 mm)
Use for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the Flat file without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom – One edge single cut – One edge is safe.
Handles are knurled.
Overall length 4″ (100 mm)
Width 3/32″ (2.2 mm)
Cut 0
Handles are knurled.
Overall length 4″ (100 mm)
Width 5/32″ (4.0 mm)
Thickness 3/64″ (1.1 mm)
Cut 0
Grobet USA Swiss Pattern Precision 6″ Half-Round Ring File, Cut 00
Precision chuck in smooth wooden handle holds 5-1/2″ (14 cm) and 6-1/4″ (16 cm) needle files securely.
Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
This idea makes a lot of sense – files made specifically for wax carving. Single cut teeth won’t clog and the files can be held like a pen for good control.
Medium
Overall Length: 5-1/2″ (140 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 3/32″ (2.4 mm)
Cut 2
Handles are knurled.
Overall Length 4″ (100 mm)
Width 1/16″ (1.7 mm)
Cut 0
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 2
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.5 mm)
Cut 2
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.6 mm)
Thickness 3/64″ (1.3 mm)
Cut 4
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (2.0 mm)
Cut 6
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 4
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 0
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 2
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64 (2.1 mm)
Cut 2
Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the point. Used primarily for filing interior curved surfaces. The double radius makes possible the filing at the junction of two curved surfaces or a straight and a curved surface. Double cut on both sides.
Length: 6″ (150 mm)
Width: 5/8″ (16.0 mm)
Thickness: 11/64″ (4.5 mm)
Cut 2
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance. Handles are knurled. Overall Length: 6-1/4″ (160 mm) Width: 7/32″ (5.3 mm) Thickness: 5/64″ (2.1 mm) Cut 6
Grobet USA Swiss Pattern Precision 6″ Half-Round Ring File, Cut 0
Length: 6″ (150 mm)
Width: 5/8″ (16.0 mm)
Thickness: 11/64″ (4.5 mm)
Cut 4
Steel wire bristles mounted on wood handle, for removing particles clogging teeth of file. Overall length 10″
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance. Handles are knurled.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Checkering files are parallel in width and gently tapered in thickness.
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification.
Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.
Handles are knurled.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Half-Round files are tapered in width and thickness, coming to a point. Double cut on both sides.
Our customers say that this is the world’s best 6pc wax needle file set. The teeth are finer and there are more teeth per inch than others.
The finest steel, milled to perfection with a diamond coating makes this 5pc set the best for precision filing jobs. Longevity is assured, as the diamond particles are electroplated onto the surface of the metal.