Browse Subcategories
Showing 1–48 of 125 results
3pc soldering pick set features 3 colors: blue gold and red to keep you from cross contaminating.
Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.
Flame can be adjusted by raising or lowering split sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel. 1/2″ wick diameter.
Allows positioning of work while annealing or soldering on a heat reflecting material, such as pumice. Rotates on ball bearings, providing 360 degree access. Pan is 12″ in diameter and comes with 21/2″ lbs. of lump pumice.
It’s the tried-and-true jewelers’ hard soldering flux. Yellow-green and self-pickling, it is the best in water-based fluxes. Well-mixed to eliminate suspension.
Replacement asbestos free soldering board 6″ x 12″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.
Replacement asbestos free soldering board 6″ x 6″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 1oz.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 16oz.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 3oz.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 32oz.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 8oz.
Prepared borax for making flux for soldering jewelry. Dissolves easily when rubbed on borax slate. Comes in 4 oz. cone.
Holds rings, leaving both hands free. Mounted in fixed position on asbestos-free base. Length of rod is 6″.
Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000F (1093C). Measures 71/2″ x 71/4″ x 7/8″.
Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.
Ceramic 6×6 block with feet. Non-asbestos. Withstands temperatures up to 2000 F (1093 C). Rubber feet keep board raised above bench.
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Rubber body with Teflon tip, makes it suitable as a blower or for suctioning excess molten solder.
Our copper pickling tweezers provide more strength than ordinary copper tweezers. Made to lift heavier objects legs are less flexible than others.
This curved copper tong is great to use with pickling solutions. Rigid and well-made. Length 8-1/2″.
For use in low temperature brazing and silver soldering ferrous and non-ferrous metals.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
Automatically keeps solution at the right temperature and prevents it from boiling away. Plastic basket is included with each unit for holding articles in solution.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
This special Firescoff formula offers additional protection for temperature-sensitive metals such as rhodium-plated white gold, gold-filled and silver.
This is a hot and handy item for depositing flux or any other liquid exactly where you want it with just an easy squeeze. The bottle has a two ounce capacity.
Well-constructed camel hair brush are noted for durability.
7″ inches long.
Lead-free solder has created a healthier environment, but the more active fluxes required to be used with it give off more fumes. Our new Fume Extractor is the perfect solution to this smoky problem.
A dry, granular acid compound used to pickle gold, silver, and other non-ferrous metal castings.
A hard soldering paste flux for use on all ferrous and non-ferrous metals and alloys.
Works with the BenchMate System for soldering. Platform measures 4″ and easily attaches right to your Benchmate system.
GRS Third-Hand Attachments make precise soldering easy by holding parts in the exact position needed.
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
Used on tripod, charcoal block, or asbestos, so that work can be heated from below while soldering or enameling. Measures 6″ x 6″.
Showing 1–48 of 125 results