Soldering
Browse Subcategories
Electronic instant-ignition system for push-button start-ups. Both flame and temperature can be adjusted precisely.
Nature’s Touch Citric Acid Pickle is a mild pickling solution used for silver, gold, brass and copper.
You can pay a lot more and never come close to the quality of this pickle pot. Stainless steel with a stoneware bowl. Sure they call it a crock-pot but it’s the best and most economical pickle pot available. Capacity is 16 oz. with a shipping weight of 2.6 lbs.
The Economical Answer to Safe Soldering! Flame causes fire resistant hose casing to change color, but internal hose remains intact. A hose that is non-flame resistant will melt, creating a dangerous situation. 12′ Pair of Hoses For Little Torch and Gentec Torch, 2 Hose Clamps Included
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
When this powder is mixed with water or alcohol, it can be used to prevent the flow of solder to unwanted areas, such as a previously soldered joint or the moving parts of a catch.
Size: 1/2 lb. box
For hard soldering with flame. Stays put like a paste, will not run like a liquid and yet is transparent. Eliminates blind joint soldering. Jel-Flux produces less oxides and residues, allowing for faster pickling. With no toxic fumes and it’s biodegradable
Medium lump pumice is heat reflecting and perfect for supporting your project either flat or embedded. 2 lb bag.
Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.
Replacement Tip for Iso-Tip Soldering Iron by Wahl (Choose Style)
Replacement Tips for Hoke-Jewel Torch
Replacement Tips for Hoke-Jewel Torch, Oxygen & Natural Gas
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.
Grooved work surface disk is 41/2″ in diameter. Rotates on ball bearings, lazy-susan style, providing 360 degree access. Perfect for soldering small parts.
A quick and clean, creamy paste flux for silver brazing and hard soldering. Use with all jewelers’ metals including silver, gold, copper, nickel and platinum. 12 oz.
Available in 1/4 oz. sheets.
Grade: Easy
Melting Point: 1240°F (671°C)
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Oxygen
Fits Cylinder: Fits disposable oxygen
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Propane
Fits Cylinder: Fits disposable propane
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
14.040 for use with propane. Fits POL cylinders.
Our solder cutting pliers offer two ways to cut. It cuts sheet solder in 1/16 -1.60mm- squares or wire solder up to 18 gauge in 1/16 -1.60mm- lengths.
Solder sheets can be easily cut in clipped pieces. Sheets are placed on bottom jaw and snipped. Pieces drop out cleanly. These can also be used to cut wire solder by inserting the wire into the side hole. Available in size; 1.5 mm.
Ingenious dispenser contains solder with flux. The proper amount of solder and flux can be placed at the exact point required, eliminating waste and improving the appearance of the joint. Solder contains no cadmium. 1/2 oz.
A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.
Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications.
High strength silver-bearing solder melts and flows at 430¬_F (221¬_C). Provides strength without distortion caused by high temperature brazing.
Kit contains 1/2 oz. of solder and 1/2 oz. of flux.
Single third hand features 6-1/2 pointed tweezer mounted on a weighted base to hold items stable and secure in any position while soldering. Enables user to have both hands free while working.
Cross-locking, 6 1/2″ tweezers closes when released. Mounted on heavy-duty horseshoe base.
Soldering pic with titanium tip and metal handle. For gold and silver solder.
Wood handle with sharp pointed tip for placing, holding and positioning solder in just the right place. Gold & silver soldering with titanium tip.
Prevents solder from flowing to unwanted areas. Brushes on easily. 1/2 oz. bottle.
A non-corrosive flux, harmless to hands or clothing. Washes off with water even after drying. Works with any soft solder. 1/2 oz. bottle.
The original low temperature melting solder; known as the Hardest soft solder on earth. Works with gun, iron, torch or soldering machine. Stays white and does not tarnish.