Horotec
1.30mm Double Flange Spring Bar Assortment Stainless Steel, 100 pcs Ten each of the following sizes:
6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 17mm, 18mm, 20mm
1.80mm Double Flange Spring Bar Assortment Stainless Steel, 100 pcs. Ten each of the following sizes:
12mm, 14mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm
Asco Swiss Made loupe. Type H, 10x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 2.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 3.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 3x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 4x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 7x. 25mm diameter. Screw in bezel for easy lens cleaning.
Generic Micro Stella regulator for all Omega Co-Axial 2500B
Generic Microstella wrench for regulating the balance on Rolex calibers
Assortment of 20 diamond burs. A variety of shapes available for multiple uses. Swiss made by Horotec.
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 232x48x15mm
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 49x41x16
Comes with standard brush and 12 mm diameter round concave tip. Great for lens, watch crystals, and dials.
Glass bottle for Epilame with a built in steel mesh basket for holding small parts. Use with Moebius Fixodrop or other epilame. With your epilame fluid in the bottle place your watch part in the steel mesh basket and insert in the top half of the bottle. Replace cap and turn up side down to […]
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
Screwdriver sizes include: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.0, 2.5 & 3.0. Replacement blades included. Swiss made.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
18 different popular sizes, 2 pieces each size.
18 different popular sizes, 2 pieces each size.
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Made in France. Includes rotating stand. Screwdriver sizes 0.50-3.00mm.
Horotec Carbon Tip Tweezers, Extra Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Horotec Carbon Tip Tweezers, Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Casing cushion with a chromed metallic ring. 75mm in diameter.
Set includes six dies and handle
Die sizes included: 18.5, 20.2, 22.5, 26.5, 28.3, 29.5
Handle measures 10-1/2″ inches in length and can be used with other Horotec dies for Omega and Baume & Mercier
Horotec Concave Delrin Die. For replacement of delrin die on Maxi-Press & Mini Press.
The Horotec demagnetizer is an electronic demagnetizer for very small parts such as hairsprings, watch wheels and mainsprings. You can even demagnetize tweezer tips and screwdriver blades.
The HOROTEC© Flashtest is an advanced, multifunctional and portable tester for analog quartz watches and movements.
A pair of hands removers for sweep second hands and the small counter hands of chronographs. Tip width 1.0mm, length 105mm
Horotec Hand Remover Set, 4mm width. Works for many pocket watch hands.
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
Precision Incabloc oiler with a gilt aluminum handle and three spare tips included.
Replacement tips (needles) for Horotec Incabloc Oiler. Sold as one piece each.
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Latex roll on finger cots size large. Package of 100 pieces.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.