Batterns Soldering Flux 8 Oz.

For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 8oz.

$7.95

Add to cart

Magic Boric Acid Powder 16 oz.

High-grade, superfine, Boric Acid Powder. Use as high-grade flux and deoxidizing agent. Can also be mixed with denatured alcohol to make soldering flux.

$9.95

Add to cart

Combo Blower & Solder-Off Bulb

Rubber body with Teflon tip, makes it suitable as a blower or for suctioning excess molten solder.

$5.85

Add to cart

Charcoal Block 3-1/2 X 2-1/4 Boxed

Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).

$10.10

Add to cart

Charcoal Block 4-3/4 X 3 Boxed

Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).

$15.40

Add to cart

Charcoal Block 7 X 4 Boxed

Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).

$31.30

Add to cart

Charcoal Block 140mm x 70mm x 30mm

Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).

$17.95

Add to cart

Ceramic Board Flat/Grooved

Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000F (1093C). Measures 71/2″ x 71/4″ x 7/8″.

$27.95

Add to cart

Fume Extractor

Lead-free solder has created a healthier environment, but the more active fluxes required to be used with it give off more fumes. Our new Fume Extractor is the perfect solution to this smoky problem.

$59.95

Add to cart

Replacement Carbon Filters Pack/2

Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.

$7.95

Add to cart

Titanium Solder Pic

Soldering pic with titanium tip and metal handle. For gold and silver solder.

$10.20

Add to cart

Tix Watch and Jewelry Solder Sticks

The original low temperature melting solder; known as the Hardest soft solder on earth. Works with gun, iron, torch or soldering machine. Stays white and does not tarnish.

$31.95

Add to cart

Tix Flux

A non-corrosive flux, harmless to hands or clothing. Washes off with water even after drying. Works with any soft solder. 1/2 oz. bottle.

$6.90

Add to cart

Ceramic Soldering Board

Ceramic 6×6 block with feet. Non-asbestos. Withstands temperatures up to 2000 F (1093 C). Rubber feet keep board raised above bench.

$19.15

Add to cart

Vigor Heat Shield

Vigor Heat Shield 16oz jar. Protects components under direct 5000 F (2760C) flame. Not necessary to remove stone before soldering. Prevents oxidation and is odorless and non-toxic.

$24.95

Add to cart

Kool Jool

Protects jewels from heat while soldering. No need to remove jewels from settings (except opals). If flame is used for soldering, the jewel will stay cool. Rinses off in plain water. 8 oz. jar.

$9.05

Add to cart

Tix Anti-Flux

Prevents solder from flowing to unwanted areas. Brushes on easily. 1/2 oz. bottle.

$5.50

Add to cart

Staybrite Solder Kit

High strength silver-bearing solder melts and flows at 430¬_F (221¬_C). Provides strength without distortion caused by high temperature brazing.
Kit contains 1/2 oz. of solder and 1/2 oz. of flux.

$34.95

Add to cart

Batterns Soldering Flux 1 Oz.

For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 1oz.

$3.60

Add to cart

Batterns Soldering Flux 3 Oz.

For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 3oz.

$5.50

Add to cart

Batterns Soldering Flux 16 Oz.

For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 16oz.

$11.70

Add to cart

Batterns Soldering Flux 32 Oz.

For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 32oz.

$22.30

Add to cart

Hoover and Strong Freeflow Flux

For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.

$13.95

Add to cart

Alligator Clips For Third Hand

Alligator Clips For Third Hand

$1.35

Add to cart

Rotating Soldering Disc 4-1/2″

Grooved work surface disk is 41/2″ in diameter. Rotates on ball bearings, lazy-susan style, providing 360 degree access. Perfect for soldering small parts.

$33.50

Add to cart

Carbon Ring Stand

Holds rings, leaving both hands free. Mounted in fixed position on asbestos-free base. Length of rod is 6″.

$30.70

Add to cart

Ceramic Ring Stand-Complete

Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.

$29.20

Add to cart

Magnesium Block

Soft, fire-proof material, into which work or pins can be easily pressed. Measures 6″ x 3″ x 11/2″. Withstands temperatures up to 2000¬_ F (1093¬_ C).

$6.40

Add to cart

Asbestos Free Pad 6 X 6 X 1/2

Replacement asbestos free soldering board 6″ x 6″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.

$43.75

Add to cart

Asbestos Free Pad 6 X 12 X 1/2

Replacement asbestos free soldering board 6″ x 12″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.

$59.40

Add to cart

Honeycomb Board 5-1/2 X 7-3/4

Contain no asbestos. Lightweight blocks reflect heat and perforations hold pins to keep work in place while heating. Withstands temperatures up to 2000F (1093C).

$15.95

Add to cart

Borax 4 Oz. Cone

Prepared borax for making flux for soldering jewelry. Dissolves easily when rubbed on borax slate. Comes in 4 oz. cone.

$8.30

Add to cart

Micro Torch

Electronic instant-ignition system for push-button start-ups. Both flame and temperature can be adjusted precisely.

$37.95

Add to cart

Alcohol Lamp-Simplicity 4 oz, 1/2″ wick diameter

Flame can be adjusted by raising or lowering split sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel. 1/2″ wick diameter.

$10.50

Add to cart

Alcohol Lamp-Glass Simplicity 4 oz.

Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.

$13.25

Add to cart

Alcohol Lamp Wicks 3/16″

Replacement Wicks for Alcohol Lamps. Supplied in packs of one dozen.

$5.90

Add to cart

Alcohol Lamp Wicks 1/4″

Replacement Wicks for Alcohol Lamps. Supplied in packs of one dozen.

$7.55

Add to cart

Solder Cutting Plier

Our solder cutting pliers offer two ways to cut. It cuts sheet solder in 1/16 -1.60mm- squares or wire solder up to 18 gauge in 1/16 -1.60mm- lengths.

$16.95

Add to cart

3 Piece Solder Pick Set- Red-Blue-Gold

3pc soldering pick set features 3 colors: blue gold and red to keep you from cross contaminating.

$14.95

Add to cart

Deluxe Titanium Soldering Pick – Blue

This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.

$4.95

Add to cart

Deluxe Titanium Soldering Pick – Gold

This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.

$4.95

Add to cart

Liver of Sulphur Gel, 2oz tube

Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.

$11.95

Add to cart

Liver of Sulphur Gel, 4oz jar

Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.

$18.95

Add to cart

Soldering Cup w/Tweezer

A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool

$15.95

Add to cart

Head and Shank Tweezer

This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.

$9.55

Add to cart

Ring Shank Tweezer w/Base

Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.

$19.95

Add to cart