Files
With natural finish. Wound wire ferrule provides extra strength to prevent splitting.
You save (%)
This diamond hone file is used for shaping a variety of plastics, metals, glass, stones, and even bone. It is mostly used to dress or reshape abrasive points that have been mounted on the piece.
You save (%)
With natural finish. Wound wire ferrule provides extra strength to prevent splitting.
You save (%)
Hardwood handle with metal ferrule suitable for small files, gravers, etc.
You save (%)
End of wood handle is bored and reinforced. Can be threaded onto tapered spindles so that small wheels, burs, etc. can be used on larger polishing motors. The chuck opens from .085″ to .128″ to fit 3/32″ and 1/8″ mandrels. Overall length 3-1/2″.
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 0
You save (%)
Grobet USA Swiss Pattern Precision file. Used for filing slots in small screws. 0.014″ in thickness. Single cut on both edges – Both sides are safe.
You save (%)
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. Double cut on both sides of coarser end. One side single cut and one side double cut on other end.
Length: 8″ (200 mm)
17/32″ (13.5 mm)
Thickness: 5/32″ (4.0 mm)
You save (%)
Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
You save (%)
Hardwood handle with metal ferrule suitable for small files, gravers, etc.
You save (%)
Use for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the Flat file without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom – One edge single cut – One edge is safe.
You save (%)
Handles are knurled.
Overall length 4″ (100 mm)
Width 3/32″ (2.2 mm)
Cut 0
You save (%)
Handles are knurled.
Overall length 4″ (100 mm)
Width 5/32″ (4.0 mm)
Thickness 3/64″ (1.1 mm)
Cut 0
You save (%)
Grobet USA Swiss Pattern Precision 6″ Half-Round Ring File, Cut 00
You save (%)
Hardwood handle with metal ferrule.
You save (%)
Precision chuck in smooth wooden handle holds 5-1/2″ (14 cm) and 6-1/4″ (16 cm) needle files securely.
You save (%)
Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
You save (%)
This idea makes a lot of sense – files made specifically for wax carving. Single cut teeth won’t clog and the files can be held like a pen for good control.
You save (%)
Set of 12 extra-fine needle files allows you to get into tight spots. All are 4 -100mm- long and cut 2. This is the smallest set available and a must for fine work.
You save (%)
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)