Polishing Compounds, Motors & Accesories
Eliminates the mess and does away with broken bars. Peel-back cardboard tube exposes only the amount needed. For hard metals such as platinum, chrome and stainless steel. Leaves little residue.
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.
Medium, 80 mesh.
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster. Flour, 200 mesh.
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.
Fine, 150 mesh.
Specially formulated for the final polishing of platinum
Approximate weight, 5 oz.
Red polishing compound is for final color high lustre finish and smooth polish on gold silver sterling and other soft metals. Approximate weight: 1 lb. bar.
Royal Velvet Red Rouge XXG. Deep red rouge for high luster on gold, silver plate and sterling. 1/2lb bar
Royal Velvet Red Rouge XXG. Deep red rouge for high luster on gold, silver plate and sterling. 1/4lb bar
No finer composition exists for producing the final, wondrous color and luster on gold and silver. Approximate weight, 1 pound.
Eliminates the mess and does away with broken bars. Peel-back cardboard tube exposes only the amount needed.
For producing a rich, dark luster on white gold, platinum, or silver. 5 oz.
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.
Red rouge for platinum, gold and silver.
Removes scratches, scuffs and blemishes from plastic watch crystals, cell phone displays, MP3 players, digital book readers, iPads, CDs, DVDs and more- surface must be plastic.
Slurry coated polishing strips are strong and durable. Unique Rayon and special propitiatory backing material sets them apart from traditional polishing paper, and results in a consistent uniform finish.
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
For use with wheels up to 3″ diameter and 1/4″ thick, with 1/4″ arbor holes.
For standard dental taper polishing motors.
For right side of motor.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Full length-split leather with superior wrap-around style and elastic comfort back. Maximum protection for all jewelry-making operations.
Recommended for fine finishing and burnishing precious metals, brass, bronze and similar materials with plastic, ceramic or metal media. Supplied with Raytech MFA metal finishing kits. Use approximately 1 tsp. per pint of water.
Designed to hold grinding wheel on right side of motors with 1/2″ straight shaft. For wheels with 1/2″ hole. Steel.
For use with brass, copper, aluminum, bronze, nickel, silver and softer metals.
Approximate weight, 2 pounds.
Use on platinum, chrome and stainless steel.
Approximate weight, 4 oz.
This addition to our line gives the user the benefit of a device to hold bracelets and rings for polishing. Made of select hardwood the Polishing Gizmo is an indispensable tool for any bench. It is varnished so that the surface will repel rouge. Length 7-3/8″.
Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.
Zam buffing compound. Formulated especially for silver and turquoise jewelry. Will not scratch soft stones such as turquoise. Leaves a high luster without residue. 1/4lb tube.
Zam buffing compound. Formulated especially for silver and turquoise jewelry. Will not scratch soft stones such as turquoise. Leaves a high luster without residue. 1lb tube.