Watch Movement Tools
Generic Micro Stella regulator for all Omega Co-Axial 3303/3313
Generic Micro Stella regulator for all Omega Co-Axial 8500
Generic Microstella wrench for regulating the balance on Rolex calibers
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
The newest in innovative watch analyzers now offered by EURO TOOL allows users to tell whether the step motor is working or if the battery is dead without opening the watch.
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
Bergeon 2729 Mainspring Winder #8. Size 12mm.
For use with ETA calibers: 2892A2, 2893-1-2-3, 2894-2, 2895-2, 2896, 2897.
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Bergeon 30102 Watch Dip Oilers (individual)
Die-cast sturdy oiler -4 cups
Brushed / sanded finish
Replaceable felt pad located in center of oilers
Swiss made
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.80 1.00
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
Swiss made slide locking jaws are specially designed to hold barrel arbors. 1.00mm diameter opening.
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Bergeon 31081 Screwdriver to Remove Etachron Pitons
Bergeon 31081-TETC Screwdriver with blade to turn ETACHRON pitons. Fine adjustment of the spiral centering between the racket pins
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold small watch movements from 9 mm (3 ¾ ligne) to 25 mm (11 ligne) in size.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
1.20mm forked remover for watch hands, wheels and rollers.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Bergeon Red Watchmaker’s pick positions batteries and watch parts without marring by using this 5 1/4in polystyrene tool. BG-6436 has one flat and one pointed end.