Watch Tools
Browse Subcategories
Horotec Flash Test is designed to be used on quartz watches with the cases opened or closed. Easily check for electronic circuit pulse, test battery voltage, and un-jam train wheels.
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Horotec Hand Remover Set, 4mm width. Works for many pocket watch hands.
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
Precision Incabloc oiler with a gilt aluminum handle and three spare tips included.
Replacement tips (needles) for Horotec Incabloc Oiler. Sold as one piece each.
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Horotec Key For Screw-on tubes Ø 2.65 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.75 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.95 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 3.00 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 35mm in diameter.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 45mm in diameter.
Slotted Plastic Block Horotec is made of high impact plastic. This slotted block has 9 holes, and 8 slots, slots measure from 2.8 mm wide to 6.3 mm wide.
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Horotec Replacement Screwdriver Blades, Curved Style for better screw fit. These are the replacement blades for MSA01.207. 13 sizes
Replacement Tip for Horotec Case Opener MSA07.115 – 2mm
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Small tool for bracelet screws.
– 3 blades Ø 1.00, 1.40 and 3.00 mm
– Metal anti-skid base.
For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
High quality, stainless steel dies are machined perfectly to fit the Breitling® cases.
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Swiss made screwdriver. Replacement blades sold here.
Inner Bezel Fitting Die for Rolex. Used in newer sapphire cases. 32.00mm interior opening.
Illuminated 1.75X magnifier provides hands free viewing. Adjustable arm provides light source quickly and efficiently to work area
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.