Shop
Browse Subcategories
Bergeon pair of small levers for removing hands have plastic handles, two different tip widths. Swiss.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
This is the complete gasket replacement kit for the Bergeon 5555/98 waterproof tester. Contains 10 different rubber o-ring gaskets and 1 flat metal washer gasket.
Plexi-cylinder Bergeon ref. 5555-98 -TP. Made for waterproof tester Bergeon Ref. 5555-98
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
Bergeon Luminous Paste kits in six colors: White, green, yellow, blue, red & orange
Bergeon Luminous Paste Varnish – refill for BG5680. Mix with luminous powder and thinner.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
First quality rotating stand with 9 screwdrivers from Bergeon. Very stable stand with adherent rubber plate.
Drum barrel made to fit over a standard watchmaker’s screwdriver to give you a better grip and more torque. With a knurled finish, the barrel attaches to screwdriver with a set-screw. 4 sizes available.
1.20mm forked remover for watch hands, wheels and rollers.
Fine silicium carbide circular abrasive wheel by Bergeon
Produces a Fine Satin Slightly Matte Finish
This is the double ended replacement tip for Bergeon Swiss Made Spring Bar Tool (6111). The tip is reversible with a pointed tip on one end and a forked tip on the other.
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4in Diameter, 3/4in Thick, 1in. (25mm) Hole Diameter with a 3/8in.(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Semi-Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Very-Fine ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Bergeon Swiss Made pocket watch keys. 5 different size winding keys. The arms are for sizes 2, 4, 6, 8, and 10.
Bergeon Swiss Made pocket watch keys. 5 different size winding keys. The arms are for sizes 3, 5, 7, 9, and 11.
Bergeon Red Watchmaker’s pick positions batteries and watch parts without marring by using this 5 1/4in polystyrene tool. BG-6436 has one flat and one pointed end.
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
Bergeon bracelet cutter. Cuts sprues up to 1/8″ (3mm) thick. Jaws are 7/8″ (2mm) long and pointed for easier access to tight areas. Made in Switzerland.
Bergeon 6745 Replacement Pins for Bergeon 9988, Various Sizes
Carbon Fiber Tweezer set of 3. Three different styles included: sharp points, medium points and flat end points.
Forked Tip Only, 1.20mm, Swiss for Metal Spring Bar Tools
Bergeon 6767-B Replacement Tip. Fork in Steel for watchmaker’s, Ø 0.80 mm.
Pointed Tip Only, 0.8mm, Swiss for Metal Spring Bar Tools
Tool for fitting and removing spring-bars with fine points and forks. Replacement tips available.
Handle in stainless steel, points in hardened tempering steel.
Length : 145 mm
Tool for fitting and removing spring-bars with standard points and forks. Replacement tips available.
Handle in stainless steel, points in hardened tempering steel.
Length : 145 mm
SELVYT and SELVYT-SR polishing gloves
Knitted cuff. Without strand deposit on pieces to be polished. Can be washed several times.
These patented boxes, transparent, allow the arrangement, packing and shipment of fragile and sharp items of every shape, produced in jewelry, horology, electronic, and so on.
High quality extra fine diamantine powder produces a final high luster on parts and tools.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.