Shop
Browse Subcategories
Citizen/Miyota 012-116 sweep second center wheel. Used in the following movements: Citizen 8200, 8210, 8260, 8270A Miyota 8205, 8215
Genuine Seiko Tuna Shroud Screw 81507109. Fits Models: SBBN015, SBBN017 & SBBN031 Fits case# 7C46-0AC0 & 7C46-0AG0
Fits Seiko Cases/Models: 4R35-02C0 SRPB81 SRPB83 SRPB85 SRPB86 4R15-00D0 SRP043 8L35-0010 SBDX001 8L35-0020 SBDX003 8L35-0040 SBDX00C 8L35-00K0 SBDX017 8L35-00G0 SBDX012
Fits Seiko Movement #s: 3180 Measurements: 1.45 x 0.13 x 420 / 4.5 x 11 x 18.5
Fits Seiko Movement #s: 60M, Goldfeather Measurements: 1.15 x 0.115 x 360 / 2.5 x 10.5 x 15.5
Fits Seiko Movement #s: 460 Measurements: 1.05 x 0.12 x 380 / 1.5 x 12.5 x 14.5
Fits Seiko Movement #s: 402 3140 6220A, 6220B, 6220C, 6220D 6222A, 6222B, 6222C Measurements: 1.05 x 0.13 x 340 / 1.5 x 9 x 14.25
12 1/2L
5.55mm Thick
Hand Size 70/120/18
3 Eye Chrono Hand Size 26
Battery CR2012
Available in 1/4 oz. sheets.
Grade: Easy
Melting Point: 1240°F (671°C)
3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
Seiko Crystal 310W76HN01 – Generic Fits case number 5H26-7A10
Size 10 1/2L
4.61mm thick
Hand Size 65/110/20
Capacitor 302624T
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Includes tube of flexible shaft lubricant(grease) and a set of replacement motor brushes.
3mm points for hard-to-reach areas.
Available in 3 grits – hard, medium, and high-shine.
Use with mandrel #117.0894
This special die set made of high-impact nylon is excellent for revolving bezels on Rolex and other fine watches. You will find this set of dies to be an enhancement and work excellent with the CRY-905.00.
Nature’s Touch Citric Acid Pickle is a mild pickling solution used for silver, gold, brass and copper.
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.
The Bench Pin Saw Vise is the perfect tool for holding metal wood or plastic for easy sawing. A necessity for the jeweler’s bench as well as for the hobbyist or craft person. Fits in standard bench slot or clamps on table.
A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool
Great for stamping, chasing and forming these 5″ Round Leather Sandbags can be used with or without a bench block.
Natural, close-density oilstones with qualities that make them unequalled for sharpening tools such as gravers, knives, etc.
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 6ml
Contain no asbestos. Lightweight blocks reflect heat and perforations hold pins to keep work in place while heating. Withstands temperatures up to 2000F (1093C).
Strong loosening fluid for screw in syringe 6 cc.
Latex roll on finger cots size large. Package of 100 pieces.
Pin Vice for cutting broaches. Reamer with chuck opening.
Polished hardwood stand (for set of seven screwdrivers, numbers 3 to 9 for baguette and pocket sizes) with carborundum sharpening stone built into base and a side compartment for spare blades. Designed especially for watchmakers. Nickel-plated to prevent rust.
Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3
For use in low temperature brazing and silver soldering ferrous and non-ferrous metals.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use. Sold by the dozen.
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 4
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 3/32″ (2.5 mm)
Cut 4
Our blue-handled French shears can cut up to 20 gauge sheet stock. With narrow points for easy maneuvering, this series features the best blades made.
Size 11 1/2 L
3.0mm thick
High canon Pinion OAH 4.80mm
Hand Size 70/120/20
Date @3
Battery 371
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 1/4″
Weight: 1 Pound Box
High-quality tweezers to make handling diamonds easy
A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.
Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications.
Handles are knurled. Overall Length: 5-1/2″ (140 mm) Width: 13/64″ (5.1 mm) Thickness: 3/64″ (1.3 mm) Cut 2
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 13/16″
3/32″ Shank
Sold by the Dozen.
High quality extra fine diamantine powder produces a final high luster on parts and tools.
Classic calf stitched black 26mm leather strap
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.