Casting
Made of clay bonded fused silica for melting temperatures up to 2800°F (1538°C). Excellent for melting gold and silver. Diameter: 3″, Depth: 1″, Capacity: 25 dwt – 255 g
High quality solid steel mandrel can increase ring size up to size 10.5. Six evenly spaced blades provide even cutting and pressure around wax. Knurled handle provides excellent grip and control. Cutting section of mandrel ranges from 1/2″ (12.7 mm) to 13/16″ (20.3 mm). Cutting mandrel fits ring sizes 1.5 to 10.5.
Superior quality clear quartz rods are annealed and fire polished to eliminate flaking. This material is GE214 semiconductor grade fused quartz. Ideal for stirring molten metal. Overall length 12″ x 3/8″ diameter. Melting point 3183° F (1750° C).
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 2-3/8″ x 1-7/8″
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 3-1/2″ x 3-1/2″
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Made of clay bonded fused silica for melting temperatures up to 2800°F (1538°C).Excellent for melting gold and silver. Diameter: 4″, Depth: 1-3/8″
For picking up crucibles and 1-1/2 inches (38 mm) diameter flasks. Length: 19 inches (483 mm)
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125°F.), burns out clean. Overall length 6″.
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
Dissolves and washes away in water, making it perfect for use as cores for beads and other hollow items. Other insoluble waxes are worked over these waxes and when immersed in water, a shell remains. Supplied in irregular chunks.
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. 1 pound box.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90 in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
1-5/16″ dia. x 11-1/4″
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 1/4″
Weight: 1 Pound Box
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 3/8″
Weight: 1 Pound Box
Slip the rubber extender over the flask prior to filling, to enable you to fill casting flasks to the top with investment. Prevents spilling of investment during vacuuming.
Slip the rubber extender over the flask prior to filling, to enable you to fill casting flasks to the top with investment. Prevents spilling of investment during vacuuming.
Black Rubber Pad for Vacuum Investing, 10-1/2″ Square