Files
Hardwood handle with metal ferrule suitable for small files, gravers, etc.
Hardwood handle with metal ferrule suitable for small files, gravers, etc.
Round handle with reinforcing metal collet. Measures: 1-5/8″ x 1-3/8″.
With natural finish. Wound wire ferrule provides extra strength to prevent splitting.
With natural finish. Wound wire ferrule provides extra strength to prevent splitting.
Precision chuck in smooth wooden handle holds 5-1/2″ (14 cm) and 6-1/4″ (16 cm) needle files securely.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only. Sold individually.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only Sold individually.
End of wood handle is bored and reinforced. Can be threaded onto tapered spindles so that small wheels, burs, etc. can be used on larger polishing motors. The chuck opens from .085″ to .128″ to fit 3/32″ and 1/8″ mandrels. Overall length 3-1/2″.
Use for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the Flat file without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom – One edge single cut – One edge is safe.
Our universal needle file handle is made of durable plastic and shaped for comfortable use without fatigue. You can change files in seconds with a twist of the ring.
Steel die inside wood handle cuts its own thread on file tang. For 6″ files only.
Handles are knurled.
Overall Length 4″ (100 mm)
Width 1/16″ (1.7 mm)
Cut 2
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 13/64″ (5.1 mm)
Thickness: 3/64″ (1.3 mm)
Cut 4
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 0
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.6 mm)
Thickness 3/64″ (1.3 mm)
Cut 4
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.5 mm)
Cut 0
Handles are knurled.
Overall Length 4″ (100 mm)
Width 1/16″ (1.7 mm)
Cut 0
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.5 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 4
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 3/32″ (2.5 mm)
Cut 2
Handles are knurled.
Overall Length: 4″ (100 mm)
Width: 5/32″ (3.7 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 3/32″ (2.4 mm)
Cut 4
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 3/32″ (2.4 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 0
Round knurled handles aid gripping. Used by mold makers, goldsmiths, gunsmiths, and musical instrument manufacturers for precise finishing on small surfaces.
Widely used in making and repairing extrusion dies.
Overall Length: 6-1/4″ (160 mm)
Width: 13/64″ (5.0 mm)
Thickness: 3/32″ (2.3 mm)
Cut 2
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 9/64″ (3.25 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 0
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64 (2.1 mm)
Cut 2
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.4 mm)
Cut 2
Handles are knurled.
Overall length 4″ (100 mm)
Width 5/32″ (4.0 mm)
Thickness 3/64″ (1.1 mm)
Cut 0
Handles are knurled.
Overall length 4″ (100 mm)
Width 3/32″ (2.2 mm)
Cut 0
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 00
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 2
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 4
The Mill file has many applications such as sharpening saws and tools, finishing metal, lathe work, draw filing as well as general shop use. All sides are single cut.
Handles are knurled.
Overall length 7-3/4″ (200 mm)
Width 5/32″ (3.75 mm)
Cut 2
Set of 12 extra-fine needle files allows you to get into tight spots. All are 4 -100mm- long and cut 2. This is the smallest set available and a must for fine work.
Steel wire bristles mounted on wood handle, for removing particles clogging teeth of file. Overall length 10″
This diamond hone file is used for shaping a variety of plastics, metals, glass, stones, and even bone. It is mostly used to dress or reshape abrasive points that have been mounted on the piece.
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 0
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 4
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 9/64″ (3.25 mm)
Cut 2
Exceptional quality for outstanding value, this handy twelve piece, cut 2 needle file set includes one each: round, square, knife, half-round, oval, three-square, warding, equaling, barrette and crossing.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)