Files
Set of 12 extra-fine needle files allows you to get into tight spots. All are 4 -100mm- long and cut 2. This is the smallest set available and a must for fine work.
Steel wire bristles mounted on wood handle, for removing particles clogging teeth of file. Overall length 10″
This diamond hone file is used for shaping a variety of plastics, metals, glass, stones, and even bone. It is mostly used to dress or reshape abrasive points that have been mounted on the piece.
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 0
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 4
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 9/64″ (3.25 mm)
Cut 2
Exceptional quality for outstanding value, this handy twelve piece, cut 2 needle file set includes one each: round, square, knife, half-round, oval, three-square, warding, equaling, barrette and crossing.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 0
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64 (2.1 mm)
Cut 0
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 2