Jewelry Tools
Browse Subcategories
Swann-Morton replacement knife blades made of carbon steel and sold by the box of 100. Curved, No. 12
Frame for 5 inch pinned blades
Designed with “S” bends to the frame, it accommodates unobstructed viewing directly over the area to be cut. The frame is equipped with an ergonomic pistol grip handle fabricated with reinforced fiber-filled plastic. Knurled thumbscrew provides easy-to-use blade tension control. Manufactured at our factory in Vallorbe, Switzerland.
Revolutionary lightweight design, perfectly balanced saw frames. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. Blade tightening screw must be opened wide enough to allow saw blades to be inserted all the way.
Grobet Swiss-style. Revolutionary design in three lightweight, perfectly balanced sawframes. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. 23/4″ (70 mm) deep. * Blade tightening screw must be opened wide enough to allow sawblades to be inserted all the way.
Grobet Swiss-style. Revolutionary designed, perfectly balanced sawframe. Ergonomic handle reduces fatigue and provides greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use.
Swiss Pattern Screwdriver Set in Plastic Box- 7 pieces
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 10, 0.50mm.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 9, 0.60mm.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 8, 0.70mm.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 7, 0.80mm.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 6, 1.00mm.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 5, 1.20mm.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 4, 1.50mm.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 3, 1.80mm.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 2, 2.00mm.
Metal: Non-Magnetic Stainless Steel, Length: 4-3/4″, Point: Sharp
Similar to pattern No. 4, except have very narrow needle-like points. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Very Sharp
Less expensive version of pattern No. 3; points are not as precision finished. Overall length 4-3/4 inches (121 mm)
Metal: Stainless Steel
Point: Sharp
Metal: Stainless Steel, Length: 4-3/4″, Point: Sharp
Metal: Non-Magnetic Stainless Steel
Length: 4-1/2″
Point: Sharp
Swiss Pattern Tweezer, Grobet USA Brand, Pattern #3C
Metal: Titanium
Length: 4-1/2″
Point: Sharp
Metal: Stainless Steel
Length: 4-1/2″
Point: Sharp
Small, handy 2 oz. Swiss-style hammer for riveting, shaping, etc. A must for light precision work.
With large free wheeling head, making it suitable for drilling, tapping, or using as a screwdriver.
This special taper-shaped buff is well suited for polishing interior and broad surfaces.
Diameter: 2-1/2″
Length: 2-1/4″
Sold individually.
The tapered head design on this cutter allows for improved access in tight areas and added precision. Shear action means a smooth flush cut. Made of tough alloy steel. Length 5 -125mm-.
The new nylon jaw pliers by EURO TOOL are a necessity for the discerning jeweler.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Coat with adhesive and roll in abrasive to form a polishing stick. Has 1/4″ arbor hole for tapered spindle mounting. Made of birchwood. May also be used to hold delicate items while polishing.
Also known as side cutters, they have semi-flush cutting edges for precision wire cutting of soft wires. Cushion grips provide comfort and retains precise alignment. Round jaw, Semi Flush cut.
Stone used with solutions and test needles to determine karat values.