Jewelry Tools
Browse Subcategories
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life. The lengths vary from approximately 1-3/4″ to over 7″, with diameters gauged slightly below largest portion of the cutting edges.
You save (%)
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 5″
Ply: 45
Stitching: 3 Rows
Shellac Center
Uncombed
You save (%)
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/8″
Hard
Sold by the Box of 24.
You save (%)
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
You save (%)
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
You save (%)
Tightly Compressed wool felt creates a medium wheel for all-purpose polishing and buffing. Pin Hole Center.
You save (%)
The #120 grit is suited for small burrs and line removal.
You save (%)
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 6″
Ply: 30
Stitching: 4 Rows
Shellac Center
Uncombed
You save (%)
Superior quality, soft textured, loose buffs, with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 60
Stitching: 1 Row
Leather Center
You save (%)
Use on platinum, chrome and stainless steel.
Approximate weight, 4 oz.
You save (%)
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 28
Unstitched
Plastic Center
You save (%)
Perfect for polishing objects with rounded surfaces. Solid felt with pinhole center. Used with tapered mandrels.
Diameter: 3/4″
Length: 1-1/2″
Sold individually.
You save (%)
For polishing objects that have concave surfaces. Made of solid felt with pin hole center. Used with tapered mandrels.
Diameter: 3/4″
Length: 1-1/2″
Sold individually.
You save (%)
Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are “staple-set” into hubs to remain securely fastened until completely worn down.
4 rows of converging bristle.
Hub Diameter – 1-7/8″
Trim Length -13/16″
Overall Diameter – 3-1/2″
You save (%)
For all-purpose use. 7-1/2″ long with wood handle.
You save (%)
Sprue Base, 4″, Tree Style. Perfect for high production operations.
You save (%)
Swiss made Pike Brand Jewelers Sawblades. 5/0 size.
Thickness: .008″
Width: .016″
Teeth per Inch: 66
You save (%)
Sprue Base, 2 1/2″, Tree Style. Perfect for high production operations.
You save (%)
Superior quality knife edge buffs are perfect for use with rouge for buffing crevices.
Diameter: 5″
Ply: 12
Stitching: 7 Rows
Razor Edge
You save (%)
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/8″
Soft
Sold by the Box of 24.
You save (%)
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
You save (%)
High-quality unmounted brushes are used for polishing with flex-shaft machines.
You save (%)
Surgically sharp blades fit into comfortable plastic handle. Widely used for cutting rubber molds.
You save (%)
Four rows of nylon bristles 1-3/4″ long, 1/2″ wide. Angled lucite handle. Overall length 6-3/4″.
You save (%)
For cleaning inside confined areas. Three rows of extra stiff bristles are 1-7/8″ long, 3/8″ high. Overall length 6″.
You save (%)
Replacement diamond reamer tips, 45 Degree Angle.
You save (%)
Superior quality, soft textured, loose buffs, with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 50
Stitching: 1 Row
Leather Center
You save (%)
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 36
Unstitched
Plastic Center
You save (%)
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
You save (%)
Golden-Glo Rouge. Adds high luster and color to gold. Small boxed 4.0oz
You save (%)
30% additional fill gives more body for the right feel and longer brush life. A metal hub with a thinner profile is assembled on specially designed production equipment. The result is a perfect brush. Bristles won’t split and washers won’t spin. For use on polishing motors with mandrels 47.258 or 47.259.
Sold by the dozen.
You save (%)
Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are “staple-set” into hubs to remain securely fastened until completely worn down.
3 rows of converging bristle.
Hub Diameter – 1-5/8″
Trim Length – 11/16″
Overall Diameter – 3″
You save (%)
Mandrel for cartridge rolls. Rubber head. Turn screw to expand head and tighten band.
You save (%)
You save (%)
Superior quality, soft textured buffs, with combed edges, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 60
Stitching: 3 Rows
Shellac Center
Combed Edge
You save (%)
Ruby Mounted Point, .117 Diameter, .259″ Head Length, 3/32″ Shank, sold individually.
You save (%)
Swiss made Pike Brand Jewelers Sawblades. 4/0 size.
Thickness: .009″
Width: .017″
Teeth per Inch: 64
You save (%)
Plastic scoop for handling dry investment. Sold with investment scale, item #21.773.
You save (%)
For iron, steel and hard metals for coarse buffing and removing scratches, rust, corrosion, burs, etc. Not for gold, silver or plated articles. 5 oz.
You save (%)
Superior quality, soft textured buffs, with combed edges, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 50
Stitching: 4 Rows
Shellac Center
Combed Edge
You save (%)