Jewelry Tools
Browse Subcategories
Use these versatile wheels for watch bands or for light de-burring and polishing of non-ferrous metals. They replace hand pads and reduce the need for a finishing operation. Great for satin finishing of steel, and ideal for surface contaminant removal.
You save (%)
Plastic handle, 10-1/2″ long, holds strips of emery paper or cloth 11″ x 1″. Strips can easily be replaced. Supplied with 2 strips, grit 120 and 240.
You save (%)
The protective heat-holding cover makes this efficient for melting with a torch. Handy pouring openings. Made of fused silica with clay bond, for melting temperatures up to 2500°F (1371°C). Best choice for gold, silver, bronze, etc.
You save (%)
Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing.
You save (%)
Slim design for better visibility. Pushing down on body releases striking mechanism, which can be adjusted for light or heavy strokes. Removable centering point can be interchanged with cup-shaped riveting point. Pocket clip included.
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
You save (%)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
You save (%)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
You save (%)
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
You save (%)
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
You save (%)
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
You save (%)
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
You save (%)
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish.
You save (%)
Plain, hardened steel mandrel may be used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting.
You save (%)
Telescoping hangers will extend 42″ above your workbench. Height adjustments are made easily with the thumbscrew.
You save (%)
General use tweezers with sturdier points slightly wider and thicker tips than pattern No. 1. Indented and have flat edges for gripping object with tip or side. The plain finished points have a fine tip.
You save (%)
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
You save (%)
The opaque shellac sticks are used to set jewels and stones or to hold work temporarily. Heat to apply. Sticks are 7″ long.
You save (%)
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
You save (%)
One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing.
You save (%)
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
You save (%)
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
You save (%)
Boley style tweezers are excellent general utility tweezers.
You save (%)
High-quality drills have straight shanks and are accurately ground then carefully tempered. Size: 0.0350 inches (0.889mm). Packed ten per box.
You save (%)
6″ lengths in assorted sizes from 20 to 70 by drill gauge.
You save (%)
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5 1/4″. Smooth jaws.
You save (%)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
You save (%)
Grobet USA Swiss Pattern Precision precision files. The standard for quality and performance! Also known as square handled needle files, these precision files are available in most of the needle file shapes.
You save (%)
These anvils have a flat smooth case hardened surface and can be used as a base for staking, riveting and drilling small parts.
You save (%)
Use brass on yellow metals such as copper and brass. Crimped wire is .003″ thick and produces a soft matte like finish.
You save (%)
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
You save (%)
Contains the five most used compounds: red rouge, yellow rouge, brown tripoli, plastic rouge and emery. All in peel-back cardboard tubes.
You save (%)
The GemOro 0752 UltraDock Charging Station can be used to cradle and charge GemOro testers when not in use.
You save (%)