Jewelry Tools
Browse Subcategories
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish.
Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape.
Plain, hardened steel mandrel may be used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
The opaque shellac sticks are used to set jewels and stones or to hold work temporarily. Heat to apply. Sticks are 7″ long.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing.
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair.
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair. Stainless steel, style H, length 3-1/2 inches (90mm).
Boley style tweezers are excellent general utility tweezers.
High-quality drills have straight shanks and are accurately ground then carefully tempered. Size: 0.0350 inches (0.889mm). Packed ten per box.
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5 1/4″. Smooth jaws.
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
Grobet USA Swiss Pattern Precision precision files. The standard for quality and performance! Also known as square handled needle files, these precision files are available in most of the needle file shapes.
These anvils have a flat smooth case hardened surface and can be used as a base for staking, riveting and drilling small parts.
Use brass on yellow metals such as copper and brass. Crimped wire is .003″ thick and produces a soft matte like finish.
Contains the five most used compounds: red rouge, yellow rouge, brown tripoli, plastic rouge and emery. All in peel-back cardboard tubes.
Made of stainless steel with stainless steel fine mesh our economical baskets offer the user a size for every need. Dimensions: 8 x 4 x 3-1/2.
The GemOro 0752 UltraDock Charging Station can be used to cradle and charge GemOro testers when not in use.
Measuring range 0-150mm digital caliper. Stainless Steel. Convenient plastic box case. Millimeter or inch readings. Easy on/off button.
Horotec Carbon Tip Tweezers, Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of hardwood this block is used to shape metal without marring. Each depression is 3/4″ deep with a gentle slope. The diameters include: 4″, 3-1/2″, 3″, and 2-1/2″.