Soldering
Browse Subcategories
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 8oz.
High-grade, superfine, Boric Acid Powder. Use as high-grade flux and deoxidizing agent. Can also be mixed with denatured alcohol to make soldering flux.
Rubber body with Teflon tip, makes it suitable as a blower or for suctioning excess molten solder.
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000F (1093C). Measures 71/2″ x 71/4″ x 7/8″.
Lead-free solder has created a healthier environment, but the more active fluxes required to be used with it give off more fumes. Our new Fume Extractor is the perfect solution to this smoky problem.
Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.
Soldering pic with titanium tip and metal handle. For gold and silver solder.
The original low temperature melting solder; known as the Hardest soft solder on earth. Works with gun, iron, torch or soldering machine. Stays white and does not tarnish.
A non-corrosive flux, harmless to hands or clothing. Washes off with water even after drying. Works with any soft solder. 1/2 oz. bottle.
Ceramic 6×6 block with feet. Non-asbestos. Withstands temperatures up to 2000 F (1093 C). Rubber feet keep board raised above bench.
Vigor Heat Shield 16oz jar. Protects components under direct 5000 F (2760C) flame. Not necessary to remove stone before soldering. Prevents oxidation and is odorless and non-toxic.
Protects jewels from heat while soldering. No need to remove jewels from settings (except opals). If flame is used for soldering, the jewel will stay cool. Rinses off in plain water. 8 oz. jar.
Prevents solder from flowing to unwanted areas. Brushes on easily. 1/2 oz. bottle.
High strength silver-bearing solder melts and flows at 430¬_F (221¬_C). Provides strength without distortion caused by high temperature brazing.
Kit contains 1/2 oz. of solder and 1/2 oz. of flux.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 1oz.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 3oz.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 16oz.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 32oz.
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.
Grooved work surface disk is 41/2″ in diameter. Rotates on ball bearings, lazy-susan style, providing 360 degree access. Perfect for soldering small parts.
Holds rings, leaving both hands free. Mounted in fixed position on asbestos-free base. Length of rod is 6″.
Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.
Soft, fire-proof material, into which work or pins can be easily pressed. Measures 6″ x 3″ x 11/2″. Withstands temperatures up to 2000¬_ F (1093¬_ C).
Replacement asbestos free soldering board 6″ x 6″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.
Replacement asbestos free soldering board 6″ x 12″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.
Contain no asbestos. Lightweight blocks reflect heat and perforations hold pins to keep work in place while heating. Withstands temperatures up to 2000F (1093C).
Prepared borax for making flux for soldering jewelry. Dissolves easily when rubbed on borax slate. Comes in 4 oz. cone.
Electronic instant-ignition system for push-button start-ups. Both flame and temperature can be adjusted precisely.
Flame can be adjusted by raising or lowering split sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel. 1/2″ wick diameter.
Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.
Our solder cutting pliers offer two ways to cut. It cuts sheet solder in 1/16 -1.60mm- squares or wire solder up to 18 gauge in 1/16 -1.60mm- lengths.
3pc soldering pick set features 3 colors: blue gold and red to keep you from cross contaminating.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.
Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.
A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.