Waxes & Wax Tools
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
Purple Wax, medium hard with medium flexibility. All-purpose wax is ideal for models with extensive piercing, baguettes and air line openings. Softening temperature 225°F (107°C).
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Pliable blue wax wires can be twisted or bent to desired patterns. All pieces are approximately 4″ long.
Contains pliable, round, blue wax wire. Assortment consists of gauges 6, 8, 10, 12, 14, 16, 18, and 20.
Phenomenal tools for filing and shaping wax but also exceptional bead or pearl reaming tools.
Our customers say that this is the world’s best 6pc wax needle file set. The teeth are finer and there are more teeth per inch than others.
This idea makes a lot of sense – files made specifically for wax carving. Single cut teeth won’t clog and the files can be held like a pen for good control.
This introductory Wax Modeling Kit is perfect for beginners and students.
Use to prepare surfaces for soldering, remove excess solders, remove burs, etc. Sharp from handle to tip and can be resharpened on a bench stone.
4 shapes with different sizes on each end. Can be used at room temperature or heated.
For testing wax temperature during the melting process. All metal with an 8″ long stem and 2″ diameter dial. Readings in both Centigrade and Fahrenheit.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. Overall length 6″.
Green Wax, hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature 230°F (110°C). 1-1/16″ diameter.
High quality solid steel mandrel can increase ring size up to size 10.5. Six evenly spaced blades provide even cutting and pressure around wax. Knurled handle provides excellent grip and control. Cutting section of mandrel ranges from 1/2″ (12.7 mm) to 13/16″ (20.3 mm). Cutting mandrel fits ring sizes 1.5 to 10.5.
No.3 wire assortment contains: Rectangle: 2, 4, 6, 8, 10 and 12 gauge; Square: 12 and 14 gauge.
Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x 3-1/8″, 1/2 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
Matt Carving Wax Slices, Purple, Assortment of 9 pieces
3-1/8″ L x 1-7/16″ W and assorted thickness from 1/8″ to 1″. Box of 12.