Waxes & Wax Tools
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
You save (%)
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
You save (%)
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x 3-1/8″, 1/2 pound bar.
You save (%)
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
You save (%)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
You save (%)
Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3
You save (%)
No.3 wire assortment contains: Rectangle: 2, 4, 6, 8, 10 and 12 gauge; Square: 12 and 14 gauge.
You save (%)
High quality solid steel mandrel can increase ring size up to size 10.5. Six evenly spaced blades provide even cutting and pressure around wax. Knurled handle provides excellent grip and control. Cutting section of mandrel ranges from 1/2″ (12.7 mm) to 13/16″ (20.3 mm). Cutting mandrel fits ring sizes 1.5 to 10.5.
You save (%)
Green Wax, hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature 230°F (110°C). 1-1/16″ diameter.
You save (%)
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. Overall length 6″.
You save (%)
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
You save (%)
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
You save (%)
Used like an adhesive to weld waxes together.
You save (%)
For testing wax temperature during the melting process. All metal with an 8″ long stem and 2″ diameter dial. Readings in both Centigrade and Fahrenheit.
You save (%)
4 shapes with different sizes on each end. Can be used at room temperature or heated.
You save (%)
Use to prepare surfaces for soldering, remove excess solders, remove burs, etc. Sharp from handle to tip and can be resharpened on a bench stone.
You save (%)
This introductory Wax Modeling Kit is perfect for beginners and students.
You save (%)
This idea makes a lot of sense – files made specifically for wax carving. Single cut teeth won’t clog and the files can be held like a pen for good control.
You save (%)
Our customers say that this is the world’s best 6pc wax needle file set. The teeth are finer and there are more teeth per inch than others.
You save (%)
Phenomenal tools for filing and shaping wax but also exceptional bead or pearl reaming tools.
You save (%)
Contains pliable, round, blue wax wire. Assortment consists of gauges 6, 8, 10, 12, 14, 16, 18, and 20.
You save (%)
Pliable blue wax wires can be twisted or bent to desired patterns. All pieces are approximately 4″ long.
You save (%)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
You save (%)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
You save (%)
Purple Wax, medium hard with medium flexibility. All-purpose wax is ideal for models with extensive piercing, baguettes and air line openings. Softening temperature 225°F (107°C).
You save (%)
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
You save (%)