Watch Tools
Browse Subcategories
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
Metal: Non-Magnetic Stainless Steel, Length: 4-3/4″, Point: Sharp
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.
Dumont Dumoxel Pattern #2 Tweezer, Anti-Magnetic Stainless Steel
This affordable 5X magnifier lamp offers the user a portable solution to viewing anything small. With a 4 lens see all the details and work with greater ease and better results
Remover for screw type case backs. This model is popular with many watchmakers offering a large surface for grasping and adjustable claws.
Spare pin set for L-G Master Case Opener – CWR-600.00
Swiss-made Gucci Screw Removing Tool is perfect for removing bracelet screws from Gucci and other high fashion watches.
Similar to pattern No. 4, except have very narrow needle-like points. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Very Sharp
The hardwood stand offers just the right degree of angle to make seeing and choosing the correct screwdriver as easy as possible.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Bergeon 7026 #3C Style Swiss Made Tweezers. Length 110mm.
Dumont Inox 08 #5A Tweezers, 4 1/2″. Oblique tips to work under microscope or magnification.
Reversible brass holder will take all shapes and sizes up to 12 1/2″ lignes.
Specifically designed for use on pallets. 2 ml. Bergeon 941-2.
Two light sources in one loupe! Use this Triplet 10X Lighted Loupe in low light environment or when extra light is desired.
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
Enables the watchmaker to position the balance-cock with his balance-spring, avoiding to pollute the oil on the staff pivot, during the corrections.
“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.
Similar to pattern No. 4, except have very narrow needle-like points.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Dumont Dumoxel Pattern #3 Tweezer, Anti-Magnetic Stainless Steel
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not accessible with regular hand vise. Width of jaws 1/2″, overall length 4-3/4″.
Shorter version of pattern No. 3. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Sharp
This is the replacement reservoir and tube for the Bergeon Watch Oiler. Fits 7718-1A
Less expensive version of pattern No. 3; points are not as precision finished. Overall length 4-3/4 inches (121 mm)
Metal: Stainless Steel
Point: Sharp
Excellent tweezers for handling all miniature and micro-miniature parts and components. The shape permits the user to rest his hand on the bench during assembly operations.
This Bergeon glass pen is ideal for cleaning watch crystals, dials, hands, and even precious stones. Can also be used to clean your loupe lens.
This durable all stainless steel basket may be placed in a 3 quart ultrasonic while suspending jewelry within the ultrasonic tank to allow it to be cleaned without burning fingers or allowing the jewelry to rest on the bottom of the tank possibly causing damage to the transducers.
1001C Double Shoulder Curved Spring Bar Assortment. Seven different sizes, 100 pieces each, 700 pc. total. Sizes included: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16″.
Swiss made anti-magnetic #3 tweezer with a black coating. The black coating gives these tweezers a nice feel in your hands along with a non-slip grip.
Oscillating Weight Axle Punch for Rolex 3035/3135
Oscillating Weight Axle Punch for Rolex 2030/2035
Oscillating Weight Axle Punch for Rolex 2130/2135
Oscillating Weight Axle Punch for Rolex 1530/1570
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2