Horotec Polishing Vice For Watch Case Backs Ø25-50mm

SKU# MSA23.503


Manual Use – The brass claws adjustment is made by clockwise turning the end cylinder; the item to be polished is held from the inside.  Used by holding the hexagonal vice during polishing.

Use on polishing motor arbor – First fix the piece to be polished on the brass claws, then fix the vice on the polishing motor arbor and tighten it with 2 screws using the hexagonal key provided.  The end cylinder is reamed out to be Ø14mm, to fix the vice on the motor arbor.  Optional reduction die is available to fit the vice on a Ø9mm motor arbor.