Shop
Browse Subcategories
Excellent tweezers for handling all miniature and micro-miniature parts. Shanks are tapered with beveled edges; points have been honed and are very sharp.
This tool offers the best of both worlds – price and quality. Made of metal with multiple dies this crystal press/case closer is the perfect tool for snap-back cases.
Our stainless steel 6-3/4 miniature digital gauge is state-of-the-art. Beautifully finished it is practical and compact. It measures in millimeters and inches -maximum 100mm 4-. Accuracy is assured at 0.01mm.
The EURO TOOL case press offers the best inexpensive case closer available. This is one of our most popular items and the closer we most recommend. Every bench should have one.
Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.
Lead-free solder has created a healthier environment, but the more active fluxes required to be used with it give off more fumes. Our new Fume Extractor is the perfect solution to this smoky problem.
Fill the cup in the center with wax or clay to form the base for the sprue.
Well balanced handle is lightweight for just the right amount of spring.
Face Diameter: 1/2″ (13 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 oz. (57 g)
General utility hammer with chisel formed end for spreading rivet heads. Supplied with a metal handle. Overall length 9″, head length 2 13/16″.
Graver is placed in either of two angled openings and rolled over flat oilstone to sharpen (oilstone not supplied). Measures 2-1/8″ x 1-3/8″ (54 x 35 mm).
Advanced diagonal flush cutting nippers, unsurpassed in cutting capacity.
Advanced diagonal micro-bevel cutting nippers, unsurpassed in cutting capacity.
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5 1/4″. Smooth jaws.
Flush cutting edges are for precision cutting of soft wire. Jaws are set at right angles for getting close to work. Overall length 4-1/4″, length of cut 9/16″.
Made in Germany. Small lightweight pliers, designed for delicate work. All have box joints to assure perfect alignment with smooth jaws and cushion grips. Overall length is 4-1/2″. Flat nose, length of jaw 7/8″
Grobet USA Swiss Pattern Precision file. Used for filing slots in small screws. 0.018″ in thickness. Single cut on both edges – Both sides are safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Half-Round files are tapered in width and thickness, coming to a point. Double cut on both sides.
European made 4pc Phillips screwdriver set features one of the smallest sizes available -1.20mm- knurled handles hex heads and tempered steel blades. Excellent for electronics computer and camera repair. Length 4-1/2.
Acon Cotter Pin Assortment #1028L. 1.0mm thick. 12 sizes, 8 pieces each size. Sizes range from 23.5-34.0mm. Refills available separately.
The GemOro 0752 UltraDock Charging Station can be used to cradle and charge GemOro testers when not in use.
Made to fit three to six quart units this 5 wide rack is heavily coated PVC over thick wire and features 18 hooks from which to hang rings deep into the tank for thorough cleaning.
Yellow abrasive with press-on/flip-off center hole feature. Set contains 25 fine, 25 coarse, and 50 medium, 7/8″ sanding discs, plus one 10.740 mandrel, in compartmented plastic box.
Natural, close-density oilstones with qualities that make them unequalled for sharpening tools such as gravers, knives, etc.
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 6ml
Non-marring bezel remover
Outside diameter 2.6″ inches (66mm)
Inside diameter 1.65″ inches (42mm)
For bezel diameters 38-45mm
Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.
Grooved work surface disk is 41/2″ in diameter. Rotates on ball bearings, lazy-susan style, providing 360 degree access. Perfect for soldering small parts.
Pair of levers for clocks and alarm-clocks. In hardened steel. Specular polish work surface. Length: 210 mm.
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Die-cast sturdy oiler -4 cups
Brushed / sanded finish
Replaceable felt pad located in center of oilers
Swiss made
Chemkote muslin buffs with leather centers are more aggressive. The treated muslin helps remove surface scratches from work. Excellent for use with tripoli and abrasive compounds.
For iron, steel and hard metals for coarse buffing and removing scratches, rust, corrosion, burs, etc. Not for gold, silver or plated articles. 5 oz.
Eliminates the mess and does away with broken bars. Peel-back cardboard tube exposes only the amount needed. For hard metals such as platinum, chrome and stainless steel. Leaves little residue.
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 50
Stitching: 3 Rows
Leather Center
Use on white gold, platinum, chrome and stainless steel
Approximate weight, 6.5 oz.
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 54
Unstitched
Plastic Center