Bergeon Products
Bergeon Luminous Paste Varnish – refill for BG5680. Mix with luminous powder and thinner.
Replacement Bits For Bergeon 2819/4 and 2819/8, Jaxa Swiss-Made Hand Wrench. 4 different sets, 3 pieces each. See listings.
You save (%)
This is the complete gasket replacement kit for the Bergeon 5555/10 waterproof tester. Contains 15 different rubber o-ring gaskets.
Pointed Tip Only, 0.8mm, Swiss for Metal Spring Bar Tools
Replacement needle for Bergeon # 5 Oiler (# 7720-5)
Needle measures 2.1″ inches (54mm) in length and has a diameter 0.8mm
Swiss made
Can also be used to replaced 2720-P
Ideal for transporting your watch, glasses or other fragile items.
Bergeon 7024-P03 Anti-magnetic Tweezers Set. Includes styles #1, #3 & #5.
Drum barrel made to fit over a standard watchmaker’s screwdriver to give you a better grip and more torque. With a knurled finish, the barrel attaches to screwdriver with a set-screw. 4 sizes available.
You save (%)
Enables the watchmaker to position the balance-cock with his balance-spring, avoiding to pollute the oil on the staff pivot, during the corrections.
Bergeon Scratch Brush Refills-12 piece pack
Automatic Drop Oiler for Shock Protection Devices and Balance Bearings of all Kinds Without Removing the Cap Jewel. E.G., Incabloc, Kif, setting jewels etc.
Rust remover from Bergeon. Excellent for watchparts. Bottle of 50gr.
Ten stainless steel screwdrivers, black elastomer grips. Special alloy blades from .50mm to 3.00mm. Heavy base, 90mm
Vissin special formula acidic solution removes broken steel screws from brass watch plates without damaging plates. Use crucible and crucible stand to heat. 50mL
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.60-0.70mm
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
100 assorted cooper Dial Feet for Wrist Watches. Swiss made.
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
Swiss made slide locking jaws are specially designed to hold barrel arbors. 1.00mm diameter opening.
Set of 10 entirely stainless steel ergonomic colour coded screwdrivers in a wooden box. Sizes:0.50mm, 0.60mm, 0.80mm, 1.00mm,1.20mm,1.40mm,1.60mm, 2.00mm, 2.50mm and 3.00mm.
Bergeon red automatic oiler. 0.19mm, High Precision, Stainless Steel Needle, Anti-Static Handle.
Beregon 30409-C watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 4.0-5.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
Swiss made anti-magnetic #3 tweezer with a black coating. The black coating gives these tweezers a nice feel in your hands along with a non-slip grip.
Spring bar tweezers, allows to take off the bracelet from the watch case.
5 Mini ergonomic standard straight blade screwdrivers in pouch. Sizes include 0.80-1.00-1.20-1.40-1.60.
5 pieces set in pouch. Includes: 1.20-1.50-2.00-2.50-3.00. Hardened stainless steel blades. Swiveling hexagonal head in self lubricating, synthetic POM (Derlin) material.
1.20mm forked remover for watch hands, wheels and rollers.
This is the replacement reservoir and tube for the Bergeon Watch Oiler. Fits 7718-1A
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.
Measures the size of watch hand holes
Gauges watch hands from .30 mm to 2.0 mm
Also features a gauge to measure the length of watch hands
Size 2 X 1 X 1″ Inches (45 X 45 X 15mm)
Swiss made
Loupe holder that is designed to clip onto glasses. Coated wire frame won’t scratch the loupe. Replaces Bergeon 5913-R.
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.
Three piece Bergeon pin vice assortment. Sizes included: 0.0-0.5mm 0.5-1.0mm/1.0-1.5mm 1.0-1.5/1.50-2.0mm
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
Bergeon 31081 Screwdriver to Remove Etachron Pitons
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Bergeon 7100 Movement Holder – specifically for ETA 6497. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
Better grip thanks to it’s anodized aluminium handle Ø 23 mm. Stainless steel blade. Total length: 138 mm.
Tool for fitting and removing spring-bars with fine points and forks. Replacement tips available.
Handle in stainless steel, points in hardened tempering steel.
Length : 145 mm
Swiss Made Bergeon screwdriver set. Set includes sizes: Ø 0.50 – 0.60 – 0.80 – 1.00 – 1.20 mm. Replacement blades available here.
Tool for fitting and removing spring-bars from watch bands. With standard points and forks, replacement tips available. See 3153A or 3153B.
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.