Bergeon Products
Bergeon Presto watch hand remover allows quick and easy removal of most watch hands. Specially designed ends prevent the tool from damaging the watch dial surface when removing hands.
You save (%)
Bergeon 7024-P03 Anti-magnetic Tweezers Set. Includes styles #1, #3 & #5.
You save (%)
For use with ETA calibers: 2824-2, 2834-2, 2836-2.
You save (%)
Drop deposit oiler. For pallets, mechanical parts, oiling spots difficult to reach.
You save (%)
Semi-Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Bergeon 7100 Movement Holder – specifically for ETA 6497. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
You save (%)
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing wheels on third wheel arbors and for chronograph driving wheels with 5 spokes. Blue handle.
You save (%)
Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4in Diameter, 3/4in Thick, 1in. (25mm) Hole Diameter with a 3/8in.(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.
You save (%)
This Jaxa-Mini case wrench is specifically designed to open case backs of large watches. The ergonomic shape provide a firm and comfortable grip. Opens diameters from 18 mm to 62 mm Delivered with 1 set of 2 pins. SWISS MADE
You save (%)
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
You save (%)
Kit of 20 cleaning sticks
Clean dials & crystals and not leave a trace!
Used in training seminars
You save (%)
Very-Fine ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Bergeon bracelet cutter. Cuts sprues up to 1/8″ (3mm) thick. Jaws are 7/8″ (2mm) long and pointed for easier access to tight areas. Made in Switzerland.
You save (%)
Automatic Drop Oiler for Shock Protection Devices and Balance Bearings of all Kinds Without Removing the Cap Jewel. E.G., Incabloc, Kif, setting jewels etc.
You save (%)
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.
You save (%)
Spring bar tweezers, allows to take off the bracelet from the watch case.
You save (%)
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
You save (%)
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
You save (%)
Base for screwing and unscrewing bracelets. Includes 4 screwdriver blades 1.0, 1.4, 1.8, 3.0 mm. Blade height can be easily adjusted with the thumb screw. 70mm base.
You save (%)
Drop injection oiler. For train wheel pivots, cup bearings, everywhere the oiler has to be positioned before depositing oil.
You save (%)
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
You save (%)
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
You save (%)
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
You save (%)