Abrasives

Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.

Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.

Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.

Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.

Yellow abrasive with press-on/flip-off center hole feature. Set contains 25 fine, 25 coarse, and 50 medium, 7/8″ sanding discs, plus one 10.740 mandrel, in compartmented plastic box.

This wheel is specially designed to minimize heat buildup on your work surface. It can be used on metal alloys and many plastics/composites.

Quickly reshapes and resurfaces abrasive stones to like-new condition. A very hard and coarse silicon carbide stone with 4 different sized half-round grooves on one side measuring 1/16″, 1/8″, 3/16″, and 1/4″. Stone itself measures: 3-1/2″ x 1-3/8″ x 9/16″

Coat with adhesive and roll in abrasive to form a polishing stick. Has 1/4″ arbor hole for tapered spindle mounting. Made of birchwood. May also be used to hold delicate items while polishing.

Slot holds emery paper so it can be wound around mandrel to desired thickness.

Emery paper is wound around mandrel for polishing smaller pieces. 2-1/4″ long, with 3/32″ shank to fit in handpiece.

Emery paper is wound around mandrel for polishing smaller pieces. 2-1/4″ long, with 3/32″ shank to fit in handpiece.

High quality steel mandrel with 3/32″ shank. For use with yellow sanding discs with snap on/off center hole feature.

Slurry coated polishing strips are strong and durable. Unique Rayon and special propitiatory backing material sets them apart from traditional polishing paper, and results in a consistent uniform finish.

Coarse pre-polish wheels. For smoothing surfaces. Operating speed range is 5,000 to 12,000 rpm.

Sold by the box of 12.

Fine,soft, and flexible. For medium luster or smooth matte finish. Operating speed range is 5,000 to 10,000 rpm.

Sold by the box of 12.

Medium, soft and flexible. For smoothing surfaces and refining edges. Operating speed range is 5,000 to 12,000 RPM.

Sold by the box of 12.

Coarse pre-polish wheels. For smoothing surfaces. Operating speed range is 5,000 to 12,000 rpm.

Sold by the box of 12.

Fine,soft, and flexible. For medium luster or smooth matte finish. Operating speed range is 5,000 to 10,000 rpm.

Sold by the box of 12.

.

Coarse pre-polish wheels. For smoothing surfaces. Operating speed range is 5,000 to 12,000 rpm.

Sold by the box of 12

Coarse pre-polish wheels. For smoothing surfaces. Operating speed range is 5,000 to 12,000 rpm.

Sold by the box of 12.

Fine,soft, and flexible. For medium luster or smooth matte finish. Operating speed range is 5,000 to 10,000 rpm.

Sold by the box of 12.

The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″

The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″

Thin grinding disks cut on the edge and on both sides. Excellent for cutting chrome casting and non-precious metal casting sprues. With pin hole for mandrel mounting. Sold by box of 100. Diameter: 7/8″ Thickness: .015″ Cutting Sides: Both