Files
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
The Mill file has many applications such as sharpening saws and tools, finishing metal, lathe work, draw filing as well as general shop use. All sides are single cut.
Use for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the Flat file without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom – One edge single cut – One edge is safe.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only. Sold individually.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only Sold individually.