Files
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 0
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64 (2.1 mm)
Cut 0
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 2
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 00
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 2
Grobet USA Swiss Pattern Precision 4″ Barrette File, Cut 1
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 3/32″ (2.5 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 4
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.
Handles are knurled.
Overall Length: 7-1/4″ (200 mm)
Width: 1/4″ (6.4 mm)
Thickness: 1/16″ (1.6 mm)
Cut 2
Engineered to deliver performance unequaled by any other file, for use on ultrahard materials.
Handles are knurled.
Overall Length 4″ (100 mm)
Width 9/64″ (3.6 mm)
Thickness 3/64″ (1.1 mm)
Cut 2
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
Overall Length: 7-3/4″ (200 mm)
Width: 1/4″ (6.5 mm)
Thickness: 5/64″ (2.0 mm)
Cut 2
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance. Handles are knurled. Overall Length: 6-1/4″ (160 mm) Width: 7/32″ (5.3 mm) Thickness: 5/64″ (2.1 mm) Cut 6
This idea makes a lot of sense – files made specifically for wax carving. Single cut teeth won’t clog and the files can be held like a pen for good control.
Warding files are parallel in thickness and tapered in width. Useful for removal of burs. Double cut top and bottom – Both edges are single cut.
Cut 2
Length: 4″ (100 mm)
Width: 31/64″ (12.5 mm)
Thickness: 3/64″ (1.0 mm)
The standard for quality and performance! Round files are gradually tapered and cut and workable to the point. Used where it is necessary to enlarge a hole or round off a radius. Double cut.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance. Handles are knurled.
Handles are knurled. Overall Length: 6-1/4″ (160 mm) Width: 9/64″ (3.7 mm) Cut 6
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 6
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.
Length: 7″ (175 mm)
Width: 1/2″ ( 12.6 mm)
Thickness: 9/64″ (3.6 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape.
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
Grobet USA Swiss Pattern Precision precision files. The standard for quality and performance! Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (2.0 mm)
Cut 6
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. Double cut on both sides of coarser end. One side single cut and one side double cut on other end.
Length: 8″ (200 mm)
17/32″ (13.5 mm)
Thickness: 5/32″ (4.0 mm)
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision precision files. The standard for quality and performance! Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by […]
Grobet USA Swiss Pattern Precision files. The standard for quality and performance!
A cross section that is flat on one side and has a radius (not half circle) on the other side. Width and thickness tapered to a point. Double cut on both sides.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision 6″ Knife File, Cut 0
Grobet USA Swiss Pattern Precision 8″ Pillar Extra-Narrow File, Cut 00
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Barrette files are tapered in width and thickness, coming to a point. Only flat side is cut, providing safe edge and top. Double cut.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the point. Used primarily for filing interior curved surfaces. The double radius makes possible the filing at the junction of two curved surfaces or a straight and a curved surface. Double cut on both sides.
Length: 6″ (150 mm)
Width: 5/8″ (16.0 mm)
Thickness: 11/64″ (4.5 mm)
Cut 2