Files
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Overall Length: 7-3/4″ (200 mm)
Width: 1/4″ (6.5 mm)
Thickness: 5/64″ (2.0 mm)
Cut 2
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Handles are knurled.
Overall Length 4″ (100 mm)
Width 9/64″ (3.6 mm)
Thickness 3/64″ (1.1 mm)
Cut 2
Engineered to deliver performance unequaled by any other file, for use on ultrahard materials.
Handles are knurled.
Overall Length: 7-1/4″ (200 mm)
Width: 1/4″ (6.4 mm)
Thickness: 1/16″ (1.6 mm)
Cut 2
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 4
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 3/32″ (2.5 mm)
Cut 4
Grobet USA Swiss Pattern Precision 4″ Barrette File, Cut 1
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 00
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64 (2.1 mm)
Cut 0
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 0
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Exceptional quality for outstanding value, this handy twelve piece, cut 2 needle file set includes one each: round, square, knife, half-round, oval, three-square, warding, equaling, barrette and crossing.
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 9/64″ (3.25 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 4
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 0
This diamond hone file is used for shaping a variety of plastics, metals, glass, stones, and even bone. It is mostly used to dress or reshape abrasive points that have been mounted on the piece.
Steel wire bristles mounted on wood handle, for removing particles clogging teeth of file. Overall length 10″
Set of 12 extra-fine needle files allows you to get into tight spots. All are 4 -100mm- long and cut 2. This is the smallest set available and a must for fine work.
Handles are knurled.
Overall length 7-3/4″ (200 mm)
Width 5/32″ (3.75 mm)
Cut 2
The Mill file has many applications such as sharpening saws and tools, finishing metal, lathe work, draw filing as well as general shop use. All sides are single cut.
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 2
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 00
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 2
Handles are knurled.
Overall length 4″ (100 mm)
Width 3/32″ (2.2 mm)
Cut 0
Handles are knurled.
Overall length 4″ (100 mm)
Width 5/32″ (4.0 mm)
Thickness 3/64″ (1.1 mm)
Cut 0
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.4 mm)
Cut 2
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64 (2.1 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 0
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 9/64″ (3.25 mm)
Cut 4
Round knurled handles aid gripping. Used by mold makers, goldsmiths, gunsmiths, and musical instrument manufacturers for precise finishing on small surfaces.
Widely used in making and repairing extrusion dies.
Overall Length: 6-1/4″ (160 mm)
Width: 13/64″ (5.0 mm)
Thickness: 3/32″ (2.3 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 0
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 3/32″ (2.4 mm)
Cut 2
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 3/32″ (2.4 mm)
Cut 4
Handles are knurled.
Overall Length: 4″ (100 mm)
Width: 5/32″ (3.7 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 3/32″ (2.5 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 4
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.5 mm)
Cut 2