Jewelry Tools
Browse Subcategories
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 0
Handles are knurled.
Overall Length: 4″ (100 mm)
Width: 5/32″ (3.7 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Warding files are parallel in thickness and tapered in width. Useful for removal of burs. Double cut top and bottom – Both edges are single cut.
Cut 2
Length: 4″ (100 mm)
Width: 31/64″ (12.5 mm)
Thickness: 3/64″ (1.0 mm)
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.
Length: 7″ (175 mm)
Width: 1/2″ ( 12.6 mm)
Thickness: 9/64″ (3.6 mm)
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. Double cut on both sides of coarser end. One side single cut and one side double cut on other end.
Length: 8″ (200 mm)
17/32″ (13.5 mm)
Thickness: 5/32″ (4.0 mm)
Three-Square files are gradually tapered, cut and workable to the point. Double cut on all three sides.
Length 8″ (200 mm)
Width 33/64″ (13.0 mm)
Cut 2
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the point. Used primarily for filing interior curved surfaces. The double radius makes possible the filing at the junction of two curved surfaces or a straight and a curved surface. Double cut on both sides.
Length: 6″ (150 mm)
Width: 5/8″ (16.0 mm)
Thickness: 11/64″ (4.5 mm)
Cut 2
Metal: Titanium
Length: 4-1/2″
Point: Sharp
Serrated jaws for pulling wire. Made of forged steel with an ergonomic design.
on wire. One handle is formed to aid in pulling. Made of forged steel.
Length: 10″
One jaw is half-round and the other is round. Overall length is 5-1/2″.
Overall length 6-1/4 inches.
Metal: Stainless Steel
Length: 5-1/2″
Point: Cup Shaped Coated
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
Computes weight of diamond without removing stone from mounting. Width and depth are measured with caliper and compared with measurements in table. For round and fancy shapes.
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
The holes in the gauge are used to measure stones, while the extensions are used to measure mountings. One side shows millimeters, the other side shows the corresponding carat measurements.
Self-locking jaws are ideal for soldering operations, or for holding parts. Blunt and serrated jaws.
Metal: Stainless Steel
Length: 6-1/2″
High quality Dazor 3-Bulb bench lamp. Adjustable arm makes positioning easy anywhere on the bench. Clamps or bolts to your bench with ease.
Double bladed case knife made by Victorinox. Tweezer and pick included. Versatile case that is an indispensable tool for any watchmaker or hobbyist. Swiss Made.
The fully adjustable drill press stand made of high-quality material, small enough to easily fit on your workbench but tough enough for any project! A lever-action drill stand for quick, efficient, and precise work. Compatible with the Standard Flexshaft Handpiece.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 232x48x15mm
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Sold by the box of 100.
Hi-Shine
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Hi-Shine
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Extra thin disks for cutting gold and porcelain.
Diameter 7/8″
Thickness: .006″
Box of 25
Extra thin disks for cutting gold and porcelain.
Diameter 7/8″
Thickness: .009″
Box of 25
Size: 5/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge Square
Sold by the box of 20
The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance. Handles are knurled. Overall Length: 6-1/4″ (160 mm) Width: 7/32″ (5.3 mm) Thickness: 5/64″ (2.1 mm) Cut 6
Holds small odd-shaped articles for engraving and other delicate work. Round jaws, 2″ diameter, open and close on twin guides by turning the threaded screw. The eight pegs supplied can be positioned in any of the holes in the jaws to secure many different shapes of work. Detachable handle to allow the jaw section to […]
Ideal for polishing concave surfaces on small objects. Made of solid felt with hard density. Use with tapered mandrel. Diameter: 1/4″ Length: 3/8″ Sold by the Box of 25.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places. 1 dozen in a pack.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places. Double section for heavy duty use. 1 dozen in a pack.
All-purpose laboratory and industrial tong for holding, manipulating and pouring, as well as for picking up hot objects. With serrated tips. Stainless steel with long neck.
Length: 9″ (229 mm)
Foredom’s higher torque flex shaft model, the M.TX hang-up style motor, is teamed up with a TXR plastic housing foot pedal.
Two Year Limited Warranty on Motor and Control.
Replacement collet for H.18, H.18D and H.18SJ Handpieces. Holds accessories with 3/32″ shanks.
Made of clay bonded fused silica for melting temperatures up to 2800°F (1538°C).Excellent for melting gold and silver. Diameter: 4″, Depth: 1-3/8″
Edenta Alphaflex Silicone Polishing Wheel, Square Edge, 12pk
Edenta Alphaflex Disc Silicone Polisher, Sharp Edge -12pk
Edenta Alphaflex Bud Shaped Silcone Polisher, 12pk.
Edenta Alphaflex Silicone Polishing Wheel, Square Edge -12pk.
for polishing gold, amalgam and composites
Edenta Silicone Polishing Wheel, Square Edge. Alphaflex 0001. Made in Switzerland. Box of 100pcs
Made for precision work, our European model, miniature machined horn anvil is case hardened steel. Size: 1-1/4″ x 4-3/4″ Weight: 1-1/4lbs
Natural, close-density oilstones with qualities that make them unequalled for sharpening tools such as gravers, knives, etc. Mounted in a hardwood box.
This durable all stainless steel basket may be placed in a 3 quart ultrasonic while suspending jewelry within the ultrasonic tank to allow it to be cleaned without burning fingers or allowing the jewelry to rest on the bottom of the tank possibly causing damage to the transducers.
Graver can be set to any angle and sharpened by setting index. Holds graver edge in position while honing on oilstone (not supplied).
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.