Jewelry Tools
Browse Subcategories
Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are “staple-set” into hubs to remain securely fastened until completely worn down.
Style # 6A and B20
2 rows of converging bristle.
Hub Diameter – 1-1/4″ and Tapered Arbor Hole.
Trim Length – 5/8″
Overall Diameter – 2-1/2″
You save (%)
Pink Hi-Shine
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.
You save (%)
- Overall length: 120mm (4.72″)
- Jaws: Round Nose, Very Fine
- Jaw length: 20mm (0.79″)
- Tip width: 0.7mm
You save (%)
Sheath for the inner shaft of the Grobet C300 and S-300 flexshaft.
You save (%)
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 3/32″ (2.4 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length 4″ (100 mm)
Width 1/16″ (1.7 mm)
Cut 0
You save (%)
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 2
You save (%)
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.5 mm)
Cut 2
You save (%)
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.6 mm)
Thickness 3/64″ (1.3 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (2.0 mm)
Cut 6
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 0
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64 (2.1 mm)
Cut 2
You save (%)
Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the point. Used primarily for filing interior curved surfaces. The double radius makes possible the filing at the junction of two curved surfaces or a straight and a curved surface. Double cut on both sides.
Length: 6″ (150 mm)
Width: 5/8″ (16.0 mm)
Thickness: 11/64″ (4.5 mm)
Cut 2
You save (%)
One jaw is half-round and the other is round. Overall length is 5-1/2″.
You save (%)
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
You save (%)
Size: 5/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
You save (%)
The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″
You save (%)
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance. Handles are knurled. Overall Length: 6-1/4″ (160 mm) Width: 7/32″ (5.3 mm) Thickness: 5/64″ (2.1 mm) Cut 6
You save (%)
Holds small odd-shaped articles for engraving and other delicate work. Round jaws, 2″ diameter, open and close on twin guides by turning the threaded screw. The eight pegs supplied can be positioned in any of the holes in the jaws to secure many different shapes of work. Detachable handle to allow the jaw section to […]
You save (%)
Replacement collet for H.18, H.18D and H.18SJ Handpieces. Holds accessories with 3/32″ shanks.
You save (%)
Graver can be set to any angle and sharpened by setting index. Holds graver edge in position while honing on oilstone (not supplied).
You save (%)
For setting diamonds and other stones. Both sets consist of six gravers, six wood handles and a step-by-step model plate.
Set contains gravers: onglette #0 and #1, flat #38 and #40 and round #50 and #52.
You save (%)
Separating Disc, 1″ x .022″, Silicon Carbide
You save (%)
Grobet USA Swiss Pattern Precision 6″ Half-Round Ring File, Cut 0
You save (%)
These waterproof papers produce a finer scratch pattern, making it easier to polish. All Matador Waterproof Paper is backed with “A” weight paper, which is extremely flexible.
You save (%)
Super strong and extra soft. Used to wrap and protect other precious stones. Box of 25 sheets.
You save (%)
Gentec Propane Regulators are manufactured using the latest state-of-the-art equipment. Can be used with the “Little Torch”.
You save (%)
Slender, tapered grip H.28 comes with 2 collets and accommodates accessories with shanks up to 1/8″. Key tip connection.
You save (%)
Krohn platinized titanium mesh anode for Rhodium plating. Measures 1″x4″.
You save (%)
A larger version of our excellent bench anvil this model is about three times the weight. At 5-1/4″ tall and 7-3/4″ from tip-to-tip the user is offered an anvil for a greater variety of tasks.
You save (%)
Can be used on hard jewels, metals, etc. Hexagonal aluminum handle prevents rolling on bench. Length 5-1/4″.
You save (%)
Length: 6″ (150 mm)
Width: 5/8″ (16.0 mm)
Thickness: 11/64″ (4.5 mm)
Cut 4
You save (%)
Our sturdy 16″ flask tongs make retrieving hot flasks easy. Solid steel.
You save (%)
High Speed Steel Pre-Shaped Graver, Onglette 2 Thickness: 1.94mm Yellow Tang
You save (%)
High Speed Steel Pre-Shaped Graver, Onglette 1 Thickness: 1.78mm Yellow Tang
You save (%)
High Speed Steel Pre-Shaped Graver, Round Edge 1.0 mm Graver No. 53 No. 10 Yellow Tang
You save (%)
High Speed Steel Pre-Shaped Graver, Round Edge 0.8 mm Graver No. 52 No. 8 Yellow Tang
You save (%)
2K Ecco pliers are excellent for those who desire quality at a modest price. Made of stainless steel with double-leaf springs, the handles feature a non-slip ergonomic-style grip for excellent comfort and control. Measuring 5″, these pliers have a brush finish, non-glare surface and box joint for years of service.
You save (%)
Natural testing stone in a larger 6″ x 4″ size offers great value and convenience. Use with solutions and test needles to determine the karat value of articles to be tested.
You save (%)