Jewelry Tools
Browse Subcategories
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 4
Miniature muslin buffs are perfect for polishing and finishing hard to reach places and small objects.
Made of clay bonded fused silica for melting temperatures up to 2800°F (1538°C).Excellent for melting gold and silver.
Diameter: 1-3/4″, Depth: 5/8″, Capacity: 16 dwt – 148 g
Protects jewels from heat while soldering. No need to remove jewels from settings (except opals). If flame is used for soldering, the jewel will stay cool. Rinses off in plain water. 8 oz. jar.
Iron Binding Wire, 22 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
For hard soldering with flame. Stays put like a paste, will not run like a liquid and yet is transparent. Eliminates blind joint soldering. Jel-Flux produces less oxides and residues, allowing for faster pickling. With no toxic fumes and it’s biodegradable
Set the graver to the required length and lock in position with the set screw. Useful for working with gravers of short length. Comes with an allen wrench
Fits wheels with 1/4″ hole size, up to 3″ in diameter and 1/2″ thick. Popular for use with rubberized abrasives.
Easy-on, easy-off, snug-fit covers protect against spills or contamination of beaker contents.
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 2
Quality adhesive cement can be used on unbreakable crystal or foil back jobs. Pressure-sensitive adhesive holds firmly and peels away easily for quick application. Pin point applicator ensures accurate dispensing.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Chemkote muslin buffs with shellac centers are more aggressive. The treated muslin helps remove surface scratches from work. Excellent for use with tripoli and abrasive compounds.
Pacific Abrasives Silicone Carbide 7/8″, Coarse, Square Edge Wheels.
Sold in a pack of 20 pc.
Grey, medium pre-polisher for precious metals.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs.
Combination inch and millimeter gauge. Capacity 2-1/4″ (60 mm). Graduations by 1/4 and 1.0 mm
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
9/16″ Diameter 3/32″ Shank. Sold by the dozen.
Use on white gold, platinum, chrome and stainless steel
Approximate weight, 4 oz.
Economical quality hammers designed for silversmiths and ideal for craftsmen. Complete with hardwood handles.
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 8″
Ply: 55
Stitching: 4 Rows
Shellac Center
Uncombed
This simple wooden rack will hold up to 10 pairs of pliers. Inexpensive and convenient keeping pliers and cutters handy and off the bench. 7-1/2 x 3-3/4 x 4-3/4.
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
Torch Holder For Bench, Low bracket-type with wide top
Used as an anti-oxidizer soldering or in making flux. 16 oz.
Use with rouge for final polishing. Made of soft cotton flannel, stitched with shellac centers.
Diameter: 8″
Ply: 3
Stitching: 4 rows
Sold individually
Has two steel chucks with spare chuck held in end of hollow brass handle. Will not roll off your bench. Capacity 0 to .079″ (0 to 2.0 mm).
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge Square
Sold by the box of 20
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Size: 5/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Use on white gold, platinum, chrome and stainless steel
Approximate weight, 6.5 oz.
The protective heat-holding cover makes this efficient for melting with a torch. Handy pouring openings. Made of fused silica with clay bond, for melting temperatures up to 2500° F (1371° C). Best choice for gold, silver, bronze, etc.
Our Allegro Italian Diamond Tweezers are a reasonably priced line of tweezers which maintains a high standard of quality.
Fabulustre 1 lb tube. One step formula for finishing precious and decorative metals. Removes scratches and leaves a high luster finish. Greaseless and clean.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
Extra Fine
Size: 5/8″ x 1/8″
Hole: 1/16″
Box of 20
Combination round nose and side cutter. Use for making loops, bends and cutting wire without changing tools. 5-1/4″ Overall length.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
This vise with 1-1/2 jaws offers a choice of clamping or screwing onto the bench. An excellent value and a necessity for every bench.
A non-corrosive flux, harmless to hands or clothing. Washes off with water even after drying. Works with any soft solder. 1/2 oz. bottle.
This assortment of Forme d’Art Sawblades contains 24 each of sizes 4/0, 3/0, 2/0, 0, 1 and 2 for a total of 1 gross.
Comfortable cotton and elastic finger cots help protect your fingers as well as protect your skin, while adding support and security when handling work pieces. Pk/20.
Red polishing compound is for final color high lustre finish and smooth polish on gold silver sterling and other soft metals. Approximate weight: 1 lb. bar.
Textured PVC handles give the user a superb grip. Double-leaf springs and box-joint construction make this series is an excellent value.
Especially handy for bead stringers on the go! Cute to look at but extremely functional. Working head is constructed from the same size blanks as larger pliers. Three piece handy “go anywhere” set includes chain, flat and round nose pliers in carded, hang-up package. Length: 3″.
An effective and economical tool for cutting multi-strand beading wire as well as headpins and other softer wires.
The new nylon jaw pliers by EURO TOOL are a necessity for the discerning jeweler.
The new nylon jaw pliers by EURO TOOL are a necessity for the discerning jeweler.
Our unique torch holder features a two-way clamp and may be attached to bench top edge or the lip of a bench to hold various torches within easy reach.
Medium lump pumice is heat reflecting and perfect for supporting your project either flat or embedded. 2 lb bag.
Our copper pickling tweezers provide more strength than ordinary copper tweezers. Made to lift heavier objects legs are less flexible than others.
Swiss Quality Carbon Fiber Tip Stainless Steel Tweezer. Non-Magnetic. 128mm length.
Commonly used for the link style bands with a T-bar style pin holding the links together
This sturdy, durable padded work mat has a non-slip backing for a clear, level and comfortable work surface.
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
Double cloth, impregnated with jeweler’s rouge. Polishes silver, gold, nickel, copper and brass. Packed individually in plastic pouch. Measures 12″ x 14″
A great idea for bead and wire artists. Made of stainless steel with a non-slip PVC handle, this 6″ mandrel will give the user consistent size loops time after time.