Jewelry Tools
Browse Subcategories
Contains 8 oz. (227 g) in lump form. When dissolved in hot water, can be used to oxidize most metals.
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 5/8″ (16 mm)
Head Length: 2 5/8″ (67 mm)
Head Weight: 5 oz. (142 g)
This durable all stainless steel basket may be placed in a 2 quart ultrasonic while suspending jewelry within the ultrasonic tank to allow it to be cleaned without burning fingers or allowing the jewelry to rest on the bottom of the tank possibly causing damage to the transducers.
Our steel square forming mandrel is great for use when a square corner is needed to bend wire or sheet. This mandrel has clipped square corners for more of a rounded square corner. Overall length is 12″ with a taper from 6mm – 18mm. Mandrels have a threaded end to accommodate the included square threaded […]
Our steel square forming mandrel is great for use when a square corner is needed to bend wire or sheet. Overall length is 12″ with a taper from 6mm – 18mm. Mandrels have a threaded end to accommodate the included square threaded rod allowing use in a vise or hole in bench keeping both hands […]
Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.
High-quality, well-balanced frames are strongly constructed with hardwood handles. Blades are firmly held by serrated lugs. The frames are adjustable to accommodate broken blades. You will get an accurate cut with our German-made saws. 3″ depth with end screw.
This clamp holds a ring externally which allows the user to file, grind or polish the inside.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
This new Bracelet Bench Block is the ideal size for working on bracelets and other large pieces.
Made of hardwood this block is used to shape metal without marring. Each depression is 3/4″ deep with a gentle slope. The diameters include: 4″, 3-1/2″, 3″, and 2-1/2″.
Bergeon loupe with new innovative design of a sight opening, provides better visibility and prevents condensation. Also has a screw on bezel so lens can be removed for cleaning. Available in black or white and multiple powers.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Measuring range 0-150mm digital caliper. Stainless Steel. Convenient plastic box case. Millimeter or inch readings. Easy on/off button.
The GemOro 0752 UltraDock Charging Station can be used to cradle and charge GemOro testers when not in use.
Made of stainless steel with stainless steel fine mesh our economical baskets offer the user a size for every need. Dimensions: 8 x 4 x 3-1/2.
Contains the five most used compounds: red rouge, yellow rouge, brown tripoli, plastic rouge and emery. All in peel-back cardboard tubes.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
Use brass on yellow metals such as copper and brass. Crimped wire is .003″ thick and produces a soft matte like finish.
These anvils have a flat smooth case hardened surface and can be used as a base for staking, riveting and drilling small parts.
Grobet USA Swiss Pattern Precision precision files. The standard for quality and performance! Also known as square handled needle files, these precision files are available in most of the needle file shapes.
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5 1/4″. Smooth jaws.
High-quality drills have straight shanks and are accurately ground then carefully tempered. Size: 0.0350 inches (0.889mm). Packed ten per box.
Boley style tweezers are excellent general utility tweezers.
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair.
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
The opaque shellac sticks are used to set jewels and stones or to hold work temporarily. Heat to apply. Sticks are 7″ long.
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
General use tweezers with sturdier points slightly wider and thicker tips than pattern No. 1. Indented and have flat edges for gripping object with tip or side. The plain finished points have a fine tip.
Plain, hardened steel mandrel may be used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting.
Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape.
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Slim design for better visibility. Pushing down on body releases striking mechanism, which can be adjusted for light or heavy strokes. Removable centering point can be interchanged with cup-shaped riveting point. Pocket clip included.