Jewelry Tools
Browse Subcategories
4 shapes with different sizes on each end. Can be used at room temperature or heated.
This 33-1/2″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
F, JJ, JB.
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Diameter: 1″
Fine
3/32″ Shank
Sold by the dozen
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 2-3/8″ x 1-7/8″
This durable non-porous mallets are great for those delicate jobs – will not scratch or mar and reduces shock on impact. The plastic head can be refaced by filing and sanding.
Different size steel collets are mounted in both ends of hollow handle. Capacity 0 to .099″ (0 to 2.5 mm), overall length 4-1/4″
Will cut anything from paper to heavy tin with their tempered stainless steel blades. The plastic handles provide comfort, lessen fatigue and feature a return spring. Made in Germany.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Use the basket with your Gemoro ultrasonic cleaner to suspend your jewelry piece within the ultrasonic tank while it’s cleaning.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 9/16″ (14 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 1/2 oz. (71 g)
Full length-split leather with superior wrap-around style and elastic comfort back. Maximum protection for all jewelry-making operations. Pack of 10.
High-Quality tweezers to make handling diamonds easy.
6″ lengths in assorted sizes from 20 to 70 by drill gauge. Packed in plastic tubes.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
Handles are knurled.
Overall Length 4″ (100 mm)
Width 9/64″ (3.6 mm)
Thickness 3/64″ (1.1 mm)
Cut 2
With fiber grips for heat resistance. Overall length 6-1/2 inches
Inverted Cone 75 Degree .323″ diameter, .157″ head length
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/32″ to 1/4″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Engineered to deliver performance unequaled by any other file, for use on ultrahard materials.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
Economical quality hammers designed for silversmiths and ideal for craftsmen. Flat head is used to flatten, shape and form objects, or strike chasing tools. Round end is for forming decorative patterns and designs. Complete with hardwood handles.
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. Overall length 6″.
Solder sheets can be easily cut in clipped pieces. Sheets are placed on bottom jaw and snipped. Pieces drop out cleanly. These can also be used to cut wire solder by inserting the wire into the side hole. Available in size; 1.5 mm.
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
1mm, 1.5mm, 2mm, 2.5mm, 3mm, and 4mm – Use with wire 22 gauge or thinner. Beadsmith
Gives maximum protection to stones. Fully felt-lined with elastic band to keep papers in proper order. Measures 7″ L x 3 3/4″ W x 2″ D.
Handles are knurled.
Overall Length: 7-1/4″ (200 mm)
Width: 1/4″ (6.4 mm)
Thickness: 1/16″ (1.6 mm)
Cut 2
Reimers Jr Low Water Light Replacement Part #04396
Ring Finger Sizing gauge measures US ring sizes for Comfort Fit style rings and bands. Gauge ranges from ring sizes 1 – 15 in half size increments. 29 pieces total.
The Super Pike Blade Set contains one dozen each of the following blade sizes: 4/0, 3/0, 2/0, 1/0, 1, and 2.
High-quality, well-balanced frames are strongly constructed with hardwood handles.
Now you can crimp any crimp bead of “medium” size (2mm-3mm) and various shapes quick and easy!
A quick and clean, creamy paste flux for silver brazing and hard soldering. Use with all jewelers’ metals including silver, gold, copper, nickel and platinum. 12 oz.
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.
Our solder cutting pliers offer two ways to cut. It cuts sheet solder in 1/16 -1.60mm- squares or wire solder up to 18 gauge in 1/16 -1.60mm- lengths.
5 -125mm- bending pliers offer the best quality/price combination anywhere. Stainless steel box-joint construction and blue textured PVC grips assure years of satisfaction.
Use for support to flatten pieces or lay out work. Flat anvil is smoothly finished. Adjustable clamp enables you to use it on benches up to 2″ thick.
Invented by a stone setter, our new Power Set pliers can be used for setting virtually any size stone.
Swiss-made rubber model has a plastic sheathed nozzle. Measures 5 x 2 and weighs 2 oz.
Dissolves cured epoxy and resins (but not Super Glue) so you can quickly and easily separate misaligned materials or clean cured resins from metal, stone, glass, wood and many other materials.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
1/2″ Diameter 3/32″ Shank. Sold by the dozen.
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
Vigor Super Glue sets in 45 to 60 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. No-drip, precision applicator allows for glue to be dispensed one drop at a time. Pack of 5 – 2 Gram Tubes
Ingenious dispenser contains solder with flux. The proper amount of solder and flux can be placed at the exact point required, eliminating waste and improving the appearance of the joint. Solder contains no cadmium. 1/2 oz.
Solid felt wheel assortment includes 1/2″, 5/8″, and 3/4″ diameter wheels in the soft grade. For use with a mandrel.
Sold by the box of 1.
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 3/8″
Weight: 1 Pound Box
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Sold by the box of 100.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).