Jewelry Tools
Browse Subcategories
Used on tripod, charcoal block, or asbestos, so that work can be heated from below while soldering or enameling. Measures 6″ x 6″.
Electronic torch lighter. Depress activator bar with torch and spark instantly lights torch. Uses 2 AA batteries (not included). Safe and easy to use.
Can be placed over Bunsen burner or alcohol lamp, or used with heating frame (No. 149.0330) so that work can be heated from below while soldering or enameling.
Torch Holder, High bracket-type with narrow top
Torch Holder For Bench, Low bracket-type with wide top
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 3/8″ -24 for 3/16″ID
Replacement diamond reamer tips, 45 Degree Angle.
Just as the title says, these are replacement jaws for the Tapered Nylon Jaw Pliers PLR-828.00.
Simply unscrew the old worn out jaws and replace them with these new jaws.
There are 36 holes drilled into the box where you can place your burs to keep them organized and easy to find. This is the perfect way to store your burs.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Tightly compressed wool felt creates a medium wheel for all-purpose polishing and buffing. Pin hole centers.
Tightly Compressed wool felt creates a medium wheel for all-purpose polishing and buffing. Pin Hole Center.
Tightly Compressed wool felt creates a medium wheel for all-purpose polishing and buffing. Pin Hole Center.
Grinding Wheel, 2″ x 1/4″, Fine Grit, Silicon Carbide, 1/4″ Arbor Hole. The rating on these wheels is not to exceed 8500 RPM.
Grinding Wheel, 3″ x 1/2″, Medium Grit, Silicon Carbide, 1/4″ Arbor Hole. The rating on these wheels is not to exceed 8500 RPM.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.
For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.
For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.
Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 13/4″ long. Sold by the dozen.
Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 13/4″ long. Sold by the dozen.
Designed for tube and handpiece cleaning. Overall length 8-5/8″. Extra stiff horsehair bristle is 3″ long.
Designed for tube and handpiece cleaning. Overall length 8-5/8″. Extra stiff horsehair bristle is 3″ long.
Four rows of stiff natural bristles 3-1/2″ long, 3/4″ wide. Overall length 8-1/4″.
Slim line acrylic job envelope holder is 3 1/2″ x 11″. Comes with three dividers to keep your job orders separate.
Use Tool Magic® on pliers tips to prevent scratching or marring your wire designs and workpieces. Simply dip the plier tips into the jar and stand them upright for 2–3 hours to dry.
For cleaning inside confined areas. Three rows of extra stiff bristles are 1-7/8″ long, 3/8″ high. Overall length 6″.
4 rows of natural bristle. Bristle measure 3″ long and 1/2″ wide. Overall length: 7-1/2″
Bristle measure 3″ long and 1/2″ wide. Overall length 7-1/2″, 3 rows of natural bristle.
Bristle measure 3″ long and 1/2″ wide. Overall length 7-1/2″. 4 rows of nylon bristle.
Four rows of nylon bristles 1-3/4″ long, 1/2″ wide. Angled lucite handle. Overall length 6-3/4″.
Bristles are available in varying degrees of hardness for cleaning and dusting clocks, instruments and parts. Bristles measure 4-1/2″ long, 5/8″ deep. Overall length 10-1/4″.
Bristles are available in varying degrees of hardness for cleaning and dusting clocks, instruments and parts. Bristles measure 4-1/2″ long, 5/8″ deep. Overall length 10-1/4″.
Bristles are available in varying degrees of hardness for cleaning and dusting clocks, instruments and parts. Bristles measure 4-1/2″ long, 5/8″ deep. Overall length 10-1/4″.
Surgically sharp blades fit into comfortable plastic handle. Widely used for cutting rubber molds.
This unique brush is designed for fast and easy cleaning of burs.
Removes rust and dirt from metal surfaces. Fine glass bristles are bound in cord to unwind as bristles wear down. Length 7″, diameter 1/2″.
Our scratch brushes with pen-shaped handles are used for removing rust or corrosion in hard to reach places. The brass model is excellent for cleaning clogged burs.
Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 7-1/4″.
Bristles are available in varying degrees of hardness for cleaning and dusting clocks, instruments and parts. Bristles measure 4-1/2″ long, 5/8″ deep.
Advanced diagonal cutting nippers, unsurpassed in cutting capacity.
Removes rust and dirt from metal surfaces. Fine glass bristles are mounted in a plastic case. Bristles can be screw-fed as they wear down. Bristles measure 1/2″ x 3/16″.
Pack of 2 replacement refills for Fiberglass Cleaning Brush No. 167.0332
Available in black, gold or silver this economical line of loupes offers the user 10 X 18mm triplets at a price that can’t be beat. Excellent for department stores. Comes in its own leather case.
Handy, all-purpose knife with sharp, well-tempered blade firmly mounted in hardwood a handle. Overall length 5″, blade length 1-3/4″.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Half-Round files are tapered in width and thickness, coming to a point. Double cut on both sides.
3″ dividers feature a quick-adjust setting nut and tempered points. Great for marking finding centers and making circles. Unsurpassed quality. Made in India.
For measuring distances between points and scribing circles or arcs. Spring action. Legs measure 4″ Max Opening: 3-3/8″