Jewelry Tools
Browse Subcategories
Low-expansion borosilicate 3.3 glass. Designed to be heat-resistant and non-conductive. Heavy and uniform wall thickness. Easy pour spouts.
Premium quality white aluminum oxide for dressing, truing, roughing and finishing diamond wheels.
Part-catching groove on all four sides. Will not warp. Measures 9″W x 16″ L
Perfect for every bench. Great sell for hobbyists! Set includes sizes 1.50mm-1.30mm-1.20mm-1.00mm-0.80mm-0.70mm-0.60mm
GemOro’s new generation of Eye Loupes features a high quality 10X, distortion free, bonded three piece lens made from optical glass, plus a built-in LED light source.
Exceptional quality for outstanding value, this handy twelve piece, cut 2 needle file set includes one each: round, square, knife, half-round, oval, three-square, warding, equaling, barrette and crossing.
Grey, medium pre-polisher for precious metals.
The new nylon jaw pliers by EURO TOOL are a necessity for the discerning jeweler.
Made of clear lucite our plier rack keeps tools off the bench and easy to find. Rack is over ten inches long and features holes for needle files burs and other tools.
Special, high concentrate prevents scale, rust buildup, and mineral deposits inside steamer. Use this super-concentrated additive to help prolong the life of your steamer.
Only 4 -100mm- long and a narrow .079 -2.0mm- thick this highly tempered opener allows the jeweler easy access to small prongs.
Our newest and best ring clamp offers the user greater reliability than other ring clamps.
Our alphabet letters include the “&” sign to make a 27 piece set.
Our alphabet letters include the “&” sign to make a 27 piece set.
Used as a base for riveting, drilling and staking small parts, our hex anvil is case hardened and well polished for long life.
Green, extra-fine polisher for precious metals, specifically softer metals such as platinum.
Green, extra-fine polisher for precious metals, specifically softer metals such as platinum.
Green, extra-fine polisher for precious metals, specifically softer metals such as platinum.
An acid based oxidizer which produces an instantaneous deep black patina on silver, gold, copper or bronze.
Made of clear Lucite, our plier rack keeps tools off the bench and easy to find. Rack features holes for needle files, burs and other tools. Gives you more bench space and speeds up work because you spend less time looking for the right tool! Size: 10-1/2″ x 3-3/4″ x 4″
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Jewelry Shield’s specially patented formula lasts much longer than any other product or remedy available. One application lasts three months. 1/2 oz. bottle.
Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass.
20 Gram Bottle
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
Pink, gold flash high-shine polishers for precious metals.
Leaves a brilliant high-gloss finish after the initial polishing process.
1000 grit.
Lightweight nylon black frame with soft PVC nosepiece. Molded-in side protection offers increased coverage for side impart. Adjustable temples lock into place.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Pink Hi-Shine
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Suitable for all purpose polishing and buffing. Pin hole centers.
Diameter: 4″
Thickness: 1/2″
Soft
Designed for polishing small and difficult to reach areas. For use with a mandrel.
Diameter: 2″
Ply: 16
Stitching: 4 Rows
Sold by the dozen
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. Pack of 5 – 2 Gram Tubes.
Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
This 39″ long inner shaft comes installed and should be used to replace broken or worn shafts on various motors.
Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)
Metal: Non-Magnetic Stainless Steel
Length: 4-1/2″
Point: Sharp
Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 9/16″ (14 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 1/2 oz. (71 g)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
White, hard pre-polisher for precious metals.
White, hard pre-polisher for precious metals.
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
Our gauges are nickel-plated for years of use at the retail level. Graduated in U.S. Standard half-sizes. Half-Round size 1 to 15
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 0