Jewelry Tools
Browse Subcategories
Diamond points are instruments with diamond particles electroplated onto stainless steel. Excellent for stone carving, cleanup work, glass, ceramics and metals.
You save (%)
Flat End Taper .098″ to .130″ diameter, .370″ head length
You save (%)
Inverted Cone .091″ to .075″ diameter, .244″ head length
You save (%)
Especially handy for bead stringers on the go! Cute to look at but extremely functional. Working head is constructed from the same size blanks as larger pliers.
You save (%)
Pliable, blue wax wire approximately 4″ long.
You save (%)
Removes rust and dirt from metal surfaces. Fine glass bristles are mounted in a plastic case. Bristles can be screw-fed as they wear down. Bristles measure 1/2″ x 3/16″.
You save (%)
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125°F.), burns out clean. Overall length 6″.
You save (%)
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
You save (%)
Oval-shaped steel burnishers for smoothing of bezels around stones and smoothing other parts of soft metals. Highly polished blades are firmly set in wood handles.
You save (%)
This special shaped cylinder buff is well suited for polishing interior and broad surfaces.
Diameter: 2″
Length: 1-3/4″
Sold individually.
You save (%)
BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.
You save (%)
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
You save (%)
Economical quality hammers designed for silversmiths and ideal for craftsmen. Complete with hardwood handles.
You save (%)
Wheel Diameter: 1″
Wheel Thickness: 1/4″
Hole Size: 1/16″
Ideal for use with rubberized abrasives. Sold by dozen.
You save (%)
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 11/16″
3/32″ Shank
Sold by the Dozen
You save (%)
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
You save (%)
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
You save (%)
Stainless steel wire looping pliers, also known by model train enthusiasts as coupling pliers, enable the user to bend wire easily. Three round jaws in one and box-jointed for durability. Jaws are finely polished, one being round and the other concave. Maximum 18 gauge wire. Length 5-3/4″ (145mm).
You save (%)
Can be placed over Bunsen burner or alcohol lamp, or used with heating frame (No. 149.0330) so that work can be heated from below while soldering or enameling.
You save (%)
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
You save (%)
Refills for Extra Thin Scratch Brush (BRS-290.00) are 4-1/4″ long and 12 per pack.
You save (%)
The Micro Crimper is also an adaptation of the Original Crimper to be used with 1mm size crimps.
You save (%)
A safe non-toxic silicone based spray to release wax patterns from rubber molds. Non-flammable, non-CFC and environmentally safe.
You save (%)
This compound cutter is a full 8-1/4 -210mm- long for excellent leverage. The jaws are hardened tool steel to cut memory wire up to 16 gauge or sprues up to 1/8. Jaw length is 5/8 -14mm-. This cutter is economical but don’t let its price fool you.
You save (%)
Self-stick, needs no moistening. Free marking pen included. 1000 pieces per package.
You save (%)
Regular width, flat, economy model with matte finish, sizes 1-15.
You save (%)
The Pocket Wire Gauge is all new and exclusively from EURO TOOL. Measures wire or sheet metal from gauges 34 to 8
You save (%)
Red silicon pad for Pro-Cast Vacuum Machine (21.805). 5-1/2″ Diameter, 1/2″ Hole.
You save (%)
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.
You save (%)
Metal: Stainless Steel, Length: 4-3/4″, Point: Sharp
You save (%)
Creates superior shape while wire wrapping
You save (%)
This 39-1/4″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
EE, GG, MMG.
You save (%)
With brass collar. Used with rubber points. Sold by dozen.
You save (%)
Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 5″.
You save (%)
Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.
You save (%)
Grobet Swiss-style. Revolutionary design in three lightweight, perfectly balanced sawframes. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. 23/4″ (70 mm) deep. * Blade tightening screw must be opened wide enough to allow sawblades to be inserted all the way.
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
You save (%)
Hi-Shine
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
You save (%)
Economical quality hammers designed for silversmiths and ideal for craftsmen. Flat head is used to flatten, shape and form objects, or strike chasing tools. Round end is for forming decorative patterns and designs. Complete with hardwood handle.
You save (%)
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 0
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
You save (%)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
You save (%)
Reimers Heating Element Gasket. #02281
You save (%)
White, hard pre-polisher for precious metals.
You save (%)
This diamond hone file is used for shaping a variety of plastics, metals, glass, stones, and even bone. It is mostly used to dress or reshape abrasive points that have been mounted on the piece.
You save (%)
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
You save (%)
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
You save (%)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)