Jewelry Tools
Browse Subcategories
Non-ammoniated jewelry cleaner. Cleans gold, diamonds, precious stones, and more!
Ammoniated Jewelry Cleaner. Cleans gold, diamonds, precious stones, and more!
1/2 Gallon tank. Backed by the L&R Double Warranty! Made in USA
3/4 Gallon tank. Backed by the L&R Double Warranty! Made in U.S.A.
Formulated for mechanical watch cleaning machines where a more efficient cleaning material is needed. 1 gallon. UPS to lower 48 states only.
This clock cleaning concentrate is the most effective solution for ultrasonic, mechanical, or manual cleaning of clock parts and movements.
For use when ammonia fumes are unacceptable. For use with L&R #3 Rinse or L&R Ultrasonic Watch Rinsing Solution.
This watch rinsing solution was formulated by L&R chemists to be a quick-drying, clear, petroleum distillate.
This specially formulated ammoniated cleaner is made to be safe for use with all L&R rinses and ultrasonic watch cleaning systems.
Ideal for price marking or labeling. Kum Kleen labels will stick to most surfaces metal, wood, plastic, etc. Easily peel off without damaging merchandise. Rectangular labels have rounded corners. Use with pen No. 60.718 (waterproof) or No. 60.700 marking pen.
Ideal for price marking or labeling. Kum Kleen labels will stick to most surfaces metal, wood, plastic, etc. Easily peel off without damaging merchandise. Rectangular labels have rounded corners. Use with pen No. 60.718 (waterproof) or No. 60.700 marking pen.
The very best in bright white rhodium finish! 1 gram – 1 pint. UPS Shippable to lower 48 states.
Tivaclean is an electrocleaning concentrate for both metals and plastics. It is an orange powder that, when mixed with water, changes to a fluorescent green to ensure full rinsing.
Krohn Tivabrite is an electrostripper and polisher for yellow gold. In most cases, it can replace “bombing”, in a hydrogen peroxide/cyanide solution, with better results.
Protects jewels from heat while soldering. No need to remove jewels from settings (except opals). If flame is used for soldering, the jewel will stay cool. Rinses off in plain water. 8 oz. jar.
For holding and tying knots. Length 4-1/4 inches (108 mm). Metal: Stainless Steel, Point: Very Sharp
This ultra-light plier gives the user precise surgeon-like control with a slim size of 3/16 x 1/8 at hinge pin.
Stainless steel metal handle used for cutting open rubber molds. Holds surgically sharp blades that snap on and are easy to change so that you always have a sharp blade.
Tightly compressed wool felt creates a medium wheel for all-purpose polishing and buffing. Pin hole centers. Choose your diameter.
Tightly compressed wool felt creates a medium wheel for all-purpose polishing and buffing. Pin hole centers.
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 5/8″
Use with mandrels sold separately.
Sold by the Box of 24.
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 5/8″
Use with mandrels sold separately.
Sold by the Box of 100.
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 1/2″
Use with mandrels sold separately.
Sold by the Box of 24.
One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing.
This clamp holds a ring externally which allows the user to file, grind or polish the inside.
Original analog gold tester using the AuRACLE technology with thousands sold Meter readout shows karat value ranges Tests 10K, 14K, 18K and 22-24K gold in all colors and identifies platinum Manual dial adjustment calibration using 18K yellow gold Durable testing plate Accessory clip for testing gold while being worn Powered by 1 AA alkaline battery […]
Aluminum pocket gauge for measuring loose stones and settings ranging from.03 to 4 carats. A birthstone chart is embossed on the reverse side.
Slim line acrylic job envelope holder is 3 1/2″ x 11″. Comes with three dividers to keep your job orders separate.
Computes weight of diamond without removing stone from mounting. Width and depth are measured with caliper and compared with measurements in table. For round and fancy shapes.
This highly versatile tool will produce round and oval jump rings in seconds, as well as giving a square, clean cut to watch bands, tubing, sizing stock, etc.
Don’t settle for imitations…Buy a genuine, solid wood, heavy-duty bench.
High-quality, well-balanced frames are strongly constructed with hardwood handles. Blades are firmly held by serrated lugs. The frames are adjustable to accommodate broken blades. You will get an accurate cut with our German-made saws. 3″ depth with end screw.
Jewelers Sawframe with End Screw, 2-1/2″ Depth
High-quality, well-balanced frames are strongly constructed with hardwood handles.
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
For wrapping silverware, jewelry and other gifts. Made of the finest quality white bleached tissue, which will not tarnish the merchandise. Comes in rolls or flat reams.
For wrapping silverware, jewelry and other gifts. Made of the finest quality white bleached tissue, which will not tarnish the merchandise. 20″ wide x 720″ long.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
Produces a dark, black antique finish on pewter, lead, brass, bronze, copper, nickel, tin-lead alloys and solders.
Produces a permanent, authentic, antique green finish on copper, brass and bronze.
Produces an antique Flemish, gray-black finish on brass, bronze and copper.
Produces an antique brown/black finish on brass, bronze and copper.
The 7700 is the basic unit and the biggest seller for a good reason. The 7700 is the crank up window of our soldering irons. The people that use them will use words like, dependable, bullet proof or easy battery change.
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
Iron Binding Wire, 29 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Iron Binding Wire, 27 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Iron Binding Wire, 22 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Plastic scoop for handling dry investment. Sold with investment scale, item #21.773.