Jewelry Tools
Browse Subcategories
Accurate, yet economical, scale weighs in 2 oz. increments. Easy to read red and black numerals on 4″ dial indicate weight, as well as water/investment ratios. Includes scoop. 10 pound capacity.
Illuminated 1.75X magnifier provides hands free viewing. Adjustable arm provides light source quickly and efficiently to work area
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Forms ingots or bullion of various sizes. Cast iron. Depth: 35 mm, Length: 90 mm, Width: 35 mm, Capacity: 78 g.
Forms ingots or bullion of various sizes. Cast iron. Depth: 3-15/16″ 135 mm, Length: 1-3/4″ 45 mm, Width: 3/16″ 5 mm, Capacity: 200 dwt 310 g.
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
Mold can make three sizes of wire. Cast iron.
Wire sizes:
3/4″ x 5/16″ x 6-11/16″
3/8″ x 3/8″ x 6-11/16″
9/32″ x 5/16″ x 6-11/16″
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Swiss made screwdriver. Replacement blades sold here.
Long recognized for the clean, sharp surfaces they produce on tools, dies, blades, molds and almost any other metal piece requiring sharpening or smoothing.
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 9/16″ – 18 for 3/16″ ID
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 3/8″ -24 for 3/16″ID
Used on regulators so that standard ID hose can be used. Left Hand Thread for Fuel Gas. Size: 3/8″ – 24 for 3/16″ ID
Twin hose assemblies are supplied with connections (9/16″ fittings). Comes in 10′ length. Hoses are black with color coded lines. Red for fuel and green for oxygen. Included are ferrules and ferrule tools. Made with DuPont™ Kevlar® Fiber
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Horotec Replacement Screwdriver Blades, Curved Style for better screw fit. These are the replacement blades for MSA01.207. 13 sizes
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
Latex roll on finger cots size large. Package of 100 pieces.
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
The Horotec demagnetizer is an electronic demagnetizer for very small parts such as hairsprings, watch wheels and mainsprings. You can even demagnetize tweezer tips and screwdriver blades.
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
Horotec Carbon Tip Tweezers, Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Horotec Carbon Tip Tweezers, Extra Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Made in France. Includes rotating stand. Screwdriver sizes 0.50-3.00mm.
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Screwdriver sizes include: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.0, 2.5 & 3.0. Replacement blades included. Swiss made.
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.
Use to prepare surfaces for soldering, remove excess solders, remove burs, etc. Sharp from handle to tip and can be resharpened on a bench stone.
Punch 2mm holes in leather or plastic bands with this handy plier. Great for sizing bands. Length 5-1/2 -145mm-.
Hoke Jewel Torch for Oxygen & Natural Gas. Comes with 3 tips.
Hoke Jewel Torch for Oxygen & Artifical Gas. Comes with 4 tips.
With these tips you get a non-oxidizing flame, so less pickling is required and jewelry comes out cleaner. Changing tips takes only a few seconds to speed up your production (HOKE-JEWEL torch must be purchased separately).
Made of high-speed steel this handy drill index offers sizes 61 – 80 (.0390″ – .0135″) for fine jobs. All drills are handily marked by size finely ground and heat-treated to a Rockwell hardness of 63. Your small drill will stay conveniently organized in this handy metal index.
The mixing chamber of the Model D blowpipe is designed for use with natural, artificial or bottled gas, but not for acetylene. Produces an intense, perfectly formed flame. Uses 1/4″ hose.
Used as a base for riveting, drilling and staking small parts, our hex anvil is case hardened and well polished for long life.
Thickness: .019″
Width: .040″
Teeth per Inch: 30
Sold by the dozen.
These versatile, stainless steel pliers can be used as a clamp, heat sink or third hand while soldering. Handles have a two-position locking device and are insulated with vinyl plastisol. Overall length 6″. Straight.
These versatile, stainless steel pliers can be used as a clamp, heat sink or third hand while soldering. Handles have a two-position locking device and are insulated with vinyl plastisol. Overall length 5 3/4″. Curved.
Specialized screwdriver with a hexagon head. Smooth ball bearing head with thick, knurled, non-slip body.
Specially designed head with 5 star shape. Smooth ball bearing head with thick, knurled, non-slip body.
Specially designed to fit the unique 3 star case back screws on Bulova Percheron watches. Smooth ball bearing head with thick, knurled, non-slip body.
Used on tripod, charcoal block, or asbestos, so that work can be heated from below while soldering or enameling. Measures 6″ x 6″.
Position the ring shank and setting to solder solitaires quickly and easily. Curved jaw has groove to hold shank securely, while flat jaw is serrated to prevent movement.
Metal: Non-Magnetic Stainless Steel
Length: 5-1/2″
Slide-Lock
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
Our HANDY BLOCK is a 4-1/2″ x 6″ block of cured hardwood with 88 holes for organizing burs, needle files, beaders, mini brushes, etc.
Same great hard chrome plated steel hoop mandrel, but now with a threaded rod attachment for handsfree use!
End of wood handle is bored and reinforced. Can be threaded onto tapered spindles so that small wheels, burs, etc. can be used on larger polishing motors. The chuck opens from .085″ to .128″ to fit 3/32″ and 1/8″ mandrels. Overall length 3-1/2″.
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent