Jewelry Tools
Browse Subcategories
Use for support to flatten pieces or lay out work. Flat anvil is smoothly finished. Adjustable clamp enables you to use it on benches up to 2″ thick.
5 -125mm- bending pliers offer the best quality/price combination anywhere. Stainless steel box-joint construction and blue textured PVC grips assure years of satisfaction.
Our solder cutting pliers offer two ways to cut. It cuts sheet solder in 1/16 -1.60mm- squares or wire solder up to 18 gauge in 1/16 -1.60mm- lengths.
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.
A quick and clean, creamy paste flux for silver brazing and hard soldering. Use with all jewelers’ metals including silver, gold, copper, nickel and platinum. 12 oz.
Now you can crimp any crimp bead of “medium” size (2mm-3mm) and various shapes quick and easy!
High-quality, well-balanced frames are strongly constructed with hardwood handles.
The Super Pike Blade Set contains one dozen each of the following blade sizes: 4/0, 3/0, 2/0, 1/0, 1, and 2.
Ring Finger Sizing gauge measures US ring sizes for Comfort Fit style rings and bands. Gauge ranges from ring sizes 1 – 15 in half size increments. 29 pieces total.
Reimers Jr Low Water Light Replacement Part #04396
Handles are knurled.
Overall Length: 7-1/4″ (200 mm)
Width: 1/4″ (6.4 mm)
Thickness: 1/16″ (1.6 mm)
Cut 2
Gives maximum protection to stones. Fully felt-lined with elastic band to keep papers in proper order. Measures 7″ L x 3 3/4″ W x 2″ D.
1mm, 1.5mm, 2mm, 2.5mm, 3mm, and 4mm – Use with wire 22 gauge or thinner. Beadsmith
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
Solder sheets can be easily cut in clipped pieces. Sheets are placed on bottom jaw and snipped. Pieces drop out cleanly. These can also be used to cut wire solder by inserting the wire into the side hole. Available in size; 1.5 mm.
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. Overall length 6″.
Economical quality hammers designed for silversmiths and ideal for craftsmen. Flat head is used to flatten, shape and form objects, or strike chasing tools. Round end is for forming decorative patterns and designs. Complete with hardwood handles.
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
Engineered to deliver performance unequaled by any other file, for use on ultrahard materials.
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/32″ to 1/4″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Inverted Cone 75 Degree .323″ diameter, .157″ head length
With fiber grips for heat resistance. Overall length 6-1/2 inches
Handles are knurled.
Overall Length 4″ (100 mm)
Width 9/64″ (3.6 mm)
Thickness 3/64″ (1.1 mm)
Cut 2
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
6″ lengths in assorted sizes from 20 to 70 by drill gauge. Packed in plastic tubes.
High-Quality tweezers to make handling diamonds easy.
Full length-split leather with superior wrap-around style and elastic comfort back. Maximum protection for all jewelry-making operations. Pack of 10.
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 9/16″ (14 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 1/2 oz. (71 g)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Use the basket with your Gemoro ultrasonic cleaner to suspend your jewelry piece within the ultrasonic tank while it’s cleaning.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Will cut anything from paper to heavy tin with their tempered stainless steel blades. The plastic handles provide comfort, lessen fatigue and feature a return spring. Made in Germany.
Different size steel collets are mounted in both ends of hollow handle. Capacity 0 to .099″ (0 to 2.5 mm), overall length 4-1/4″
This durable non-porous mallets are great for those delicate jobs – will not scratch or mar and reduces shock on impact. The plastic head can be refaced by filing and sanding.
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 2-3/8″ x 1-7/8″
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Diameter: 1″
Fine
3/32″ Shank
Sold by the dozen
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout.
This 33-1/2″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
F, JJ, JB.
4 shapes with different sizes on each end. Can be used at room temperature or heated.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
For high-detail and ultra-precision work. Files may be broken off and cemented onto a holder or used with a pin vise. Fine grit.
Overall Length: 7-3/4″ (200 mm)
Width: 1/4″ (6.5 mm)
Thickness: 5/64″ (2.0 mm)
Cut 2
Use brass on yellow metals such as copper and brass. Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Keeps your work area clean, while protecting your tools. Handy 156 – hole carousel holds burs aswell as brushes, drills, etc. Holes measure 3/32″ (2.4mm. Rotates 360°).
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use.
3/4″ Diameter 1/8″ Shank. Sold by the dozen.
Medium-duty bench knife features a slim 1-3/4″ blade set firmly in hardwood handle. Overall length 5″.
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.
Fine, 150 mesh.
The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″