Jewelry Tools
Browse Subcategories
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 00
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 4
Nicely polished and beveled on one end for smaller mountings this industry standard is tempered to the proper hardness tough but not brittle.
Made of clay bonded fused silica for melting temperatures up to 2800°F (1538°C).Excellent for melting gold and silver. Diameter: 4″, Depth: 1-3/8″
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster. Flour, 200 mesh.
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
6″ long arch-shaped block of carving wax is designed to simplify the construction of bracelets. From one blank style you can create round, oval or square bracelets in a variety of sizes. Simply cut two slices of the desired thickness to form the bracelet, then trim using the Matt Shaper.
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 5/8″
Use with mandrels sold separately.
Sold by the Box of 24.
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64 (2.1 mm)
Cut 0
Diamond points are instruments with diamond particles electroplated onto stainless steel. Excellent for stone carving, cleanup work, glass, ceramics and metals.
Removes rust and dirt from metal surfaces. Fine glass bristles are mounted in a plastic case. Bristles can be screw-fed as they wear down. Bristles measure 1/2″ x 3/16″.
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125°F.), burns out clean. Overall length 6″.
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
Oval-shaped steel burnishers for smoothing of bezels around stones and smoothing other parts of soft metals. Highly polished blades are firmly set in wood handles.
This special shaped cylinder buff is well suited for polishing interior and broad surfaces.
Diameter: 2″
Length: 1-3/4″
Sold individually.
BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
Economical quality hammers designed for silversmiths and ideal for craftsmen. Complete with hardwood handles.
Wheel Diameter: 1″
Wheel Thickness: 1/4″
Hole Size: 1/16″
Ideal for use with rubberized abrasives. Sold by dozen.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 11/16″
3/32″ Shank
Sold by the Dozen
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Stainless steel wire looping pliers, also known by model train enthusiasts as coupling pliers, enable the user to bend wire easily. Three round jaws in one and box-jointed for durability. Jaws are finely polished, one being round and the other concave. Maximum 18 gauge wire. Length 5-3/4″ (145mm).
Can be placed over Bunsen burner or alcohol lamp, or used with heating frame (No. 149.0330) so that work can be heated from below while soldering or enameling.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
Refills for Extra Thin Scratch Brush (BRS-290.00) are 4-1/4″ long and 12 per pack.
The Micro Crimper is also an adaptation of the Original Crimper to be used with 1mm size crimps.
A safe non-toxic silicone based spray to release wax patterns from rubber molds. Non-flammable, non-CFC and environmentally safe.
This compound cutter is a full 8-1/4 -210mm- long for excellent leverage. The jaws are hardened tool steel to cut memory wire up to 16 gauge or sprues up to 1/8. Jaw length is 5/8 -14mm-. This cutter is economical but don’t let its price fool you.
Self-stick, needs no moistening. Free marking pen included. 1000 pieces per package.
The Pocket Wire Gauge is all new and exclusively from EURO TOOL. Measures wire or sheet metal from gauges 34 to 8
Red silicon pad for Pro-Cast Vacuum Machine (21.805). 5-1/2″ Diameter, 1/2″ Hole.
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.
Metal: Stainless Steel, Length: 4-3/4″, Point: Sharp