Jewelry Tools
Browse Subcategories
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.
White, hard pre-polisher for precious metals.
- Overall length: 120mm (4.72″)
- Jaws: Round Nose, Very Fine
- Jaw length: 20mm (0.79″)
- Tip width: 0.7mm
Sheath for the inner shaft of the Grobet C300 and S-300 flexshaft.
Handles are knurled.
Overall Length 4″ (100 mm)
Width 1/16″ (1.7 mm)
Cut 0
Handles are knurled.
Overall length 4″ (100 mm)
Width 3/32″ (2.2 mm)
Cut 0
Handles are knurled.
Overall length 4″ (100 mm)
Width 5/32″ (4.0 mm)
Thickness 3/64″ (1.1 mm)
Cut 0
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (2.0 mm)
Cut 6
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 4
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 0
One jaw is half-round and the other is round. Overall length is 5-1/2″.
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
Size: 5/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″
Holds small odd-shaped articles for engraving and other delicate work. Round jaws, 2″ diameter, open and close on twin guides by turning the threaded screw. The eight pegs supplied can be positioned in any of the holes in the jaws to secure many different shapes of work. Detachable handle to allow the jaw section to […]
Graver can be set to any angle and sharpened by setting index. Holds graver edge in position while honing on oilstone (not supplied).
For setting diamonds and other stones. Both sets consist of six gravers, six wood handles and a step-by-step model plate.
Set contains gravers: onglette #0 and #1, flat #38 and #40 and round #50 and #52.
Grobet USA Swiss Pattern Precision 6″ Half-Round Ring File, Cut 0
These waterproof papers produce a finer scratch pattern, making it easier to polish. All Matador Waterproof Paper is backed with “A” weight paper, which is extremely flexible.