Jewelry Tools
Browse Subcategories
Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)
Metal: Non-Magnetic Stainless Steel
Length: 4-1/2″
Point: Sharp
Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 9/16″ (14 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 1/2 oz. (71 g)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
White, hard pre-polisher for precious metals.
White, hard pre-polisher for precious metals.
Reimers Heating Element Gasket. #02281
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 0
Economical quality hammers designed for silversmiths and ideal for craftsmen. Flat head is used to flatten, shape and form objects, or strike chasing tools. Round end is for forming decorative patterns and designs. Complete with hardwood handle.
Hi-Shine
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Grobet Swiss-style. Revolutionary design in three lightweight, perfectly balanced sawframes. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. 23/4″ (70 mm) deep. * Blade tightening screw must be opened wide enough to allow sawblades to be inserted all the way.
Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.
Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 5″.
With brass collar. Used with rubber points. Sold by dozen.
This 39-1/4″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
EE, GG, MMG.
Metal: Stainless Steel, Length: 4-3/4″, Point: Sharp
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.
Red silicon pad for Pro-Cast Vacuum Machine (21.805). 5-1/2″ Diameter, 1/2″ Hole.
The Pocket Wire Gauge is all new and exclusively from EURO TOOL. Measures wire or sheet metal from gauges 34 to 8
Self-stick, needs no moistening. Free marking pen included. 1000 pieces per package.
This compound cutter is a full 8-1/4 -210mm- long for excellent leverage. The jaws are hardened tool steel to cut memory wire up to 16 gauge or sprues up to 1/8. Jaw length is 5/8 -14mm-. This cutter is economical but don’t let its price fool you.
A safe non-toxic silicone based spray to release wax patterns from rubber molds. Non-flammable, non-CFC and environmentally safe.
The Micro Crimper is also an adaptation of the Original Crimper to be used with 1mm size crimps.
Refills for Extra Thin Scratch Brush (BRS-290.00) are 4-1/4″ long and 12 per pack.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
Can be placed over Bunsen burner or alcohol lamp, or used with heating frame (No. 149.0330) so that work can be heated from below while soldering or enameling.
Stainless steel wire looping pliers, also known by model train enthusiasts as coupling pliers, enable the user to bend wire easily. Three round jaws in one and box-jointed for durability. Jaws are finely polished, one being round and the other concave. Maximum 18 gauge wire. Length 5-3/4″ (145mm).
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 11/16″
3/32″ Shank
Sold by the Dozen
Wheel Diameter: 1″
Wheel Thickness: 1/4″
Hole Size: 1/16″
Ideal for use with rubberized abrasives. Sold by dozen.