Jewelry Tools

For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.

Metal: Stainless Steel, Length: 4-3/4″, Point: Sharp

Creates superior shape while wire wrapping

This 39-1/4″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
EE, GG, MMG.

With brass collar. Used with rubber points. Sold by dozen.

Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 5″.

Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.

Grobet Swiss-style. Revolutionary design in three lightweight, perfectly balanced sawframes. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. 23/4″ (70 mm) deep. * Blade tightening screw must be opened wide enough to allow sawblades to be inserted all the way.

Handles are knurled.

Overall Length: 5-1/2″ (140 mm)

Width: 3/16″ (5.0 mm)

Thickness: 5/64″ (2.1 mm)

Cut 4

Hi-Shine

Size: 7/8″ x 1/8″

Hole: 1/16″

Edge: Square

Sold by the box of 20

Economical quality hammers designed for silversmiths and ideal for craftsmen. Flat head is used to flatten, shape and form objects, or strike chasing tools. Round end is for forming decorative patterns and designs. Complete with hardwood handle.

Handles are knurled.

Overall Length 5-1/2″ (140 mm)

Width 9/64″ (3.5 mm)

Cut 0

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.3 mm)

Thickness: 5/64″ (2.1 mm)

Cut 4

A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.

Length 6″ (150 mm)

Width 13/64″ (5.0 mm)

Cut 2

Reimers Heating Element Gasket.  #02281

White, hard pre-polisher for precious metals.

This diamond hone file is used for shaping a variety of plastics, metals, glass, stones, and even bone. It is mostly used to dress or reshape abrasive points that have been mounted on the piece.

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.

100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 5/64″ (2.0 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.

Face Diameter: 9/16″ (14 mm)

Head Length: 2″ (51 mm)

Head Weight: 2 1/2 oz. (71 g)

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.

Metal: Non-Magnetic Stainless Steel

Length: 4-1/2″

Point: Sharp

Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)

This 39″ long inner shaft comes installed and should be used to replace broken or worn shafts on various motors.

A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.

Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.

Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. Pack of 5 – 2 Gram Tubes.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Available in black, gold or silver this economical line of loupes offers the user 10 X 18mm triplets at a price that can’t be beat. Excellent for department stores. Comes in its own leather case.

No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs.

Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.

Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).

Designed for polishing small and difficult to reach areas. For use with a mandrel.

Diameter: 2″

Ply: 16

Stitching: 4 Rows

Sold by the dozen

Suitable for all purpose polishing and buffing. Pin hole centers.

Diameter: 4″

Thickness: 1/2″

Soft

Pink Hi-Shine

Size: 5/8″ x 1/8″

Hole: 1/16″

Edge: Square

Sold by the box of 20

Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.

Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.

Lightweight nylon black frame with soft PVC nosepiece. Molded-in side protection offers increased coverage for side impart. Adjustable temples lock into place.

• 20X Magnification
• 21mm Lens diameter
• LED light
• On/Off switch
• Batteries included

Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass.
20 Gram Bottle

Jewelry Shield’s specially patented formula lasts much longer than any other product or remedy available. One application lasts three months. 1/2 oz. bottle.