Jewelry Tools
Browse Subcategories
Handles are knurled.
Overall Length: 4″ (100 mm)
Width: 5/32″ (3.7 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
You save (%)
Warding files are parallel in thickness and tapered in width. Useful for removal of burs. Double cut top and bottom – Both edges are single cut.
Cut 2
Length: 4″ (100 mm)
Width: 31/64″ (12.5 mm)
Thickness: 3/64″ (1.0 mm)
You save (%)
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.
Length: 7″ (175 mm)
Width: 1/2″ ( 12.6 mm)
Thickness: 9/64″ (3.6 mm)
You save (%)
Three-Square files are gradually tapered, cut and workable to the point. Double cut on all three sides.
Length 8″ (200 mm)
Width 33/64″ (13.0 mm)
Cut 2
You save (%)
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
You save (%)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
You save (%)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
You save (%)
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
You save (%)
Metal: Titanium
Length: 4-1/2″
Point: Sharp
You save (%)
Serrated jaws for pulling wire. Made of forged steel with an ergonomic design.
on wire. One handle is formed to aid in pulling. Made of forged steel.
Length: 10″
You save (%)
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
You save (%)
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
You save (%)
Computes weight of diamond without removing stone from mounting. Width and depth are measured with caliper and compared with measurements in table. For round and fancy shapes.
You save (%)
The holes in the gauge are used to measure stones, while the extensions are used to measure mountings. One side shows millimeters, the other side shows the corresponding carat measurements.
You save (%)
High quality Dazor 3-Bulb bench lamp. Adjustable arm makes positioning easy anywhere on the bench. Clamps or bolts to your bench with ease.
You save (%)
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
You save (%)
Sold by the box of 100.
You save (%)
Hi-Shine
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
You save (%)
Hi-Shine
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
You save (%)
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
You save (%)
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
You save (%)
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge Square
Sold by the box of 20
You save (%)
Ideal for polishing concave surfaces on small objects. Made of solid felt with hard density. Use with tapered mandrel. Diameter: 1/4″ Length: 3/8″ Sold by the Box of 25.
You save (%)
All-purpose laboratory and industrial tong for holding, manipulating and pouring, as well as for picking up hot objects. With serrated tips. Stainless steel with long neck.
Length: 9″ (229 mm)
You save (%)
Foredom’s higher torque flex shaft model, the M.TX hang-up style motor, is teamed up with a TXR plastic housing foot pedal.
Two Year Limited Warranty on Motor and Control.
You save (%)
Edenta Alphaflex Silicone Polishing Wheel, Square Edge, 12pk
You save (%)
Edenta Alphaflex Disc Silicone Polisher, Sharp Edge -12pk
You save (%)
Edenta Alphaflex Bud Shaped Silcone Polisher, 12pk.
You save (%)
Edenta Alphaflex Silicone Polishing Wheel, Square Edge -12pk.
You save (%)
for polishing gold, amalgam and composites
You save (%)
Edenta Silicone Polishing Wheel, Square Edge. Alphaflex 0001. Made in Switzerland. Box of 100pcs
You save (%)
Made for precision work, our European model, miniature machined horn anvil is case hardened steel. Size: 1-1/4″ x 4-3/4″ Weight: 1-1/4lbs
You save (%)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
You save (%)
Wood handle with sharp pointed tip for placing, holding and positioning solder in just the right place. Gold & silver soldering with titanium tip.
You save (%)
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 3-1/2″ x 3-1/2″
You save (%)
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 2-3/8″ x 1-7/8″
You save (%)
Cup-shaped cutters on wheels used to dress up a setting, ring mounting, or any piece of jewelry, by forming a decorative bead or fine row of cuts along the edge. Sets contain six sizes plus chuck-holding handle.
53.102 – Included in Set, Size #2
53.104 – Included in Set, Size #4
53.106 – Included in Set, Size #6
53.108 – Included in Set, Size #8
53.110 – Included in Set, Size 10
53.110 – Included in Set, Size 10
53.112 – Included in Set, Size 12
You save (%)
Holds all popular size pearls securely in position for drilling. Knurled locknuts provide quick clamping and releasing action.
You save (%)
Specially designed head with 5 star shape. Smooth ball bearing head with thick, knurled, non-slip body.
You save (%)
Specialized screwdriver with a hexagon head. Smooth ball bearing head with thick, knurled, non-slip body.
You save (%)
Economical quality hammers designed for silversmiths and ideal for craftsmen. Flat head is used to flatten, shape and form objects, or strike chasing tools. Round end is for forming decorative patterns and designs. Complete with hardwood handles.
You save (%)
Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3
You save (%)
Designed for polishing small and difficult to reach areas. For use with a mandrel.
Diameter: 1-1/4″
Ply: 16
Stitching: 3 Rows
Sold by the dozen
You save (%)
Grobet USA Swiss Pattern Precision 8″ Pillar Extra-Narrow File, Cut 00
You save (%)
Grobet USA Swiss Pattern Precision 6″ Knife File, Cut 0
You save (%)
Grobet USA Swiss Pattern Precision 6″ Half-Round File, Cut 3
You save (%)
Grobet USA Swiss Pattern Precision 6″ Half-Round File, Cut 6
You save (%)
Grobet USA Swiss Pattern Precision 8″ Half-Round File, Cut 2
You save (%)
Has a half-round, highly polished, steel head for rolling bezels around stones in rings, pendants, broaches etc.
You save (%)
No.3 wire assortment contains: Rectangle: 2, 4, 6, 8, 10 and 12 gauge; Square: 12 and 14 gauge.
You save (%)
Stainless steel wire looping pliers, also known by model train enthusiasts as coupling pliers, enable the user to bend wire easily. Three round jaws in one and box-jointed for durability. Jaws are finely polished, one being round and the other concave. Maximum 18 gauge wire. Length 5-3/4″ (145mm).
You save (%)
Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 5″.
You save (%)
For cleaning, polishing and finishing. Made from natural rubber with graded pumice grain evenly distributed to assure uniform results. The light action produces a smooth finish on soft metals. Arbor hole is 1/16″.Sold by the box of 100.
You save (%)
Gentec Oxygen Regulators are manufactured using the latest state-of-the-art equipment. Can be used with the “Little Torch”.
You save (%)
Economical workhorse, ideal for precision work. Ball-bearing motor runs smoothly, requires no lubrication. Includes motor, handpiece, and foot pedal. Full 1-year warranty.
You save (%)
Superior quality clear quartz rods are annealed and fire polished to eliminate flaking. This material is GE214 semiconductor grade fused quartz. Ideal for stirring molten metal. Overall length 12″ x 3/8″ diameter. Melting point 3183° F (1750° C).
You save (%)
High quality solid steel mandrel can increase ring size up to size 10.5. Six evenly spaced blades provide even cutting and pressure around wax. Knurled handle provides excellent grip and control. Cutting section of mandrel ranges from 1/2″ (12.7 mm) to 13/16″ (20.3 mm). Cutting mandrel fits ring sizes 1.5 to 10.5.
You save (%)
Double Motor hanger with bench clamp mount features 3-pc hexagonal support rod and safety hook rod for holding one or two motors. (Motors not included)
You save (%)