Jewelry Tools
Browse Subcategories
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Replacement Tip for Iso-Tip Soldering Iron by Wahl (Choose Style)
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
The 7700 is the basic unit and the biggest seller for a good reason. The 7700 is the crank up window of our soldering irons. The people that use them will use words like, dependable, bullet proof or easy battery change.
Only 4 -100mm- long and a narrow .079 -2.0mm- thick this highly tempered opener allows the jeweler easy access to small prongs.
Nicely polished and beveled on one end for smaller mountings this industry standard is tempered to the proper hardness tough but not brittle.
A must for every watchmaker this movement holder clamps onto the edge of your bench. The holder is made of metal and will hold any size movement.
This universally popular shape gives watchmakers the small handle necessary to properly grip when prying open snap-on case backs.
Commonly used for the link style bands with a T-bar style pin holding the links together
Fill this reusable bottle with your choice of cement, UV glue, lubricant, paint, or other liquid requiring precision application.
Recommended for bright polishing of hard alloys such as platinum, white gold, chrome cobalt and stainless steel.
First quality rotating stand with 9 screwdrivers from Bergeon. Very stable stand with adherent rubber plate.
Swiss made Pike Brand Jewelers Sawblades. 3/0 size.
Thickness: .010″
Width: .019″
Teeth per Inch: 57
Swiss made Pike Brand Jewelers Sawblades. 4/0 size.
Thickness: .009″
Width: .017″
Teeth per Inch: 64
Swiss made Pike Brand Jewelers Sawblades. 5/0 size.
Thickness: .008″
Width: .016″
Teeth per Inch: 66
Swiss made Pike Brand Jewelers Sawblades. 8/0 size
Thickness: .007″
Width: .014″
Teeth per Inch: 84
Swiss made Pike Brand Jewelers Sawblades. 8/0 size
Thickness: .006″
Width: .013″
Teeth per Inch: 84
Sharp hooked points for wire wrapping, forming, bending and coiling. The angled points can also be useful for hard-to-get-at spots.
Similar to pattern No. 2, except points are .055 inches (1.4 mm) wide and rounded at the tips.
These compounds are efficient, fast-acting, and leave less residue than the cheaper compounds previously found in the marketplace.
One ounce of concentrated granules is mixed with one gallon of water to form a fast-acting solution.
Special, high concentrate prevents scale, rust buildup, and mineral deposits inside steamer. Use this super-concentrated additive to help prolong the life of your steamer.
This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
This special Firescoff formula offers additional protection for temperature-sensitive metals such as rhodium-plated white gold, gold-filled and silver.
A quick and clean, creamy paste flux for silver brazing and hard soldering. Use with all jewelers’ metals including silver, gold, copper, nickel and platinum. 12 oz.
It’s the tried-and-true jewelers’ hard soldering flux. Yellow-green and self-pickling, it is the best in water-based fluxes. Well-mixed to eliminate suspension.
Krohn Tivabrite is an electrostripper and polisher for yellow gold. In most cases, it can replace “bombing”, in a hydrogen peroxide/cyanide solution, with better results.
Tivaclean is an electrocleaning concentrate for both metals and plastics. It is an orange powder that, when mixed with water, changes to a fluorescent green to ensure full rinsing.
Platinized Titanium T-Bar Anode for Rhodium Plating. 10 1/4″ x 4″
Easy-on, easy-off, snug-fit covers protect against spills or contamination of beaker contents.
Easy-on, easy-off, snug-fit covers protect against spills or contamination of beaker contents.
This mesh style platinized titanium anode is used with rhodium plating solution or acid-based gold solutions. With proper care, this high quality anodes will last indefinitely.
Low-expansion borosilicate 3.3 glass. Designed to be heat-resistant and non-conductive. Heavy and uniform wall thickness. Easy pour spouts.
Use these sturdy shears for cutting soft wire up to 16 ga. thick and sheet up to 20 ga. thick. Sharp blades (57–59 HRC) leave a very clean edge.
Handy plier-like tools made originally for medical purposes work perfectly as clamps for small articles.
The original perfect non-scratch holder for steam and ultrasonic cleaning. Steamostats feature stainless steel box-joint construction PVC covered non-scratching tips.
100% natural beeswax supplied in a convenient 1 oz. push-up applicator tube, which makes this wax easier to use, store and less messy.
The cordless bead reamer is a great tool to smooth and enlarge bead holes. Light weight and easy to use it comes with 3 tips small pointed 45° edger and large pointed reamer.
Our universal needle file handle is made of durable plastic and shaped for comfortable use without fatigue. You can change files in seconds with a twist of the ring.
Round handle with reinforcing metal collet. Measures: 1-5/8″ x 1-3/8″.
Excellent for handling diamonds, pearls and beads. Nickel-plated with chrome finish
Excellent for handling diamonds, pearls and beads. Non-reflective black finish
Full flush bead nippers feature the desired “shear action” cut so the edges hold up longer and give you a truly “flush” cut. Excellent for all soft wire up to 20 gauge and beading wire too!
Stainless steel nylon-coated cord. Can be knotted and tied, but cannot be cut by rough edges of drilled stones.
.021″
Heavy
With a revolutionary micro fiber that will not snag or shed it is the optimal texture and softness for cleaning film from precious stones especially diamonds.
With pointed shank. Overall length 4-3/4 inches (121 mm). Sharp points.
Tips are cup-shaped to hold small round objects. Overall length 5 3/4″
Small holder fits in pocket. Wire jaws contract into body and plunger in end opens the jaws. Overall length 2 inches (51 mm).
The GemOro Testerossa features NEW ADVANCED EXCLUSIVE MOISSANITE TESTING TECHNOLOGY capable of identifying the widest range of the electrically conductive moissanite material available