Jewelry Tools
Browse Subcategories
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Emery paper is wound around mandrel for polishing smaller pieces. 2-1/4″ long, with 3/32″ shank to fit in handpiece.
36-1/4″ long, standard material outer sheath comes equipped on most motors.
Removes rust and dirt from metal surfaces. Fine glass bristles are bound in cord to unwind as bristles wear down. Length 7″, diameter 1/2″.
Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Made of Nickel plated steel. Length: 10″
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
Spring action holds screwdriver firmly in place. Steel wheels are carefully set into body to provide even action when wheeled over stone. Overall width is 19/16″ (40mm).
Made of 100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer with minimal fraying and better compound retention. Achieve a smooth, uniform finish with superior coloring quality every time.
Diameter: 7/8″
Ply: 16
Stitching: 1 Row
Shellac Center
Sold by the Dozen
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 13/16″
3/32″ Shank
Sold by the Dozen.
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.
Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications.
High-quality tweezers to make handling diamonds easy
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 1/4″
Weight: 1 Pound Box
Our blue-handled French shears can cut up to 20 gauge sheet stock. With narrow points for easy maneuvering, this series features the best blades made.
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 3/32″ (2.5 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 4
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use. Sold by the dozen.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
For use in low temperature brazing and silver soldering ferrous and non-ferrous metals.
Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3
Watchmakers ergonomic screwdrivers
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 6ml
Great for stamping, chasing and forming these 5″ Round Leather Sandbags can be used with or without a bench block.
A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool
The Bench Pin Saw Vise is the perfect tool for holding metal wood or plastic for easy sawing. A necessity for the jeweler’s bench as well as for the hobbyist or craft person. Fits in standard bench slot or clamps on table.
This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.
3mm points for hard-to-reach areas.
Available in 3 grits – hard, medium, and high-shine.
Use with mandrel #117.0894
Includes tube of flexible shaft lubricant(grease) and a set of replacement motor brushes.
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.
3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).
Available in 1/4 oz. sheets.
Grade: Easy
Melting Point: 1240°F (671°C)
Orange flake shellac holds objects for chasing, engraving, or setting. Heat to apply. 6 oz. container.
Use with rouge to produce the highest finish on gold. Stitched with leather patch. on center for firm grip on tapered spindle.
Diameter: 3″
Ply: 12
Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 8-1/4″.
Ideal for polishing concave surfaces on small objects. Made of solid felt with hard density. Use with tapered mandrel. Diameter: 1/4″ Length: 3/8″ Sold by the Box of 25.
32-5/8″ long, standard material outer sheath comes equipped on ALL Flexades: S.B0-516, S.B0-14, S.B0-12, S.B0-38
For wire or heavy metal strands where you don’t want to ruin your normal cutters.
Our 1.0mm x 1.7mm oval hole punch pliers will punch copper or silver as thick as 22 gauge. With ergonomic handles and tempered replaceable pin these pliers will save you time and money.
This rack features a 7-1/2″ bar area for easy accessibility to your favorite pliers. Two “tray extensions”, each with two round depressions, for holding small parts or bits of solder.
Santaper Belts, Sold by pack of 10. Available in 120, 240, 320, 400 & 600 grits.