Jewelry Tools
Browse Subcategories
Recommended for bright polishing of hard alloys such as platinum, white gold, chrome cobalt and stainless steel.
The brightest shine for yellow gold. Also produces a brilliant shine on silver.
These compounds are efficient, fast-acting, and leave less residue than the cheaper compounds previously found in the marketplace.
One ounce of concentrated granules is mixed with one gallon of water to form a fast-acting solution.
Special, high concentrate prevents scale, rust buildup, and mineral deposits inside steamer. Use this super-concentrated additive to help prolong the life of your steamer.
This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
This special Firescoff formula offers additional protection for temperature-sensitive metals such as rhodium-plated white gold, gold-filled and silver.
A quick and clean, creamy paste flux for silver brazing and hard soldering. Use with all jewelers’ metals including silver, gold, copper, nickel and platinum. 12 oz.
It’s the tried-and-true jewelers’ hard soldering flux. Yellow-green and self-pickling, it is the best in water-based fluxes. Well-mixed to eliminate suspension.
Krohn Tivabrite is an electrostripper and polisher for yellow gold. In most cases, it can replace “bombing”, in a hydrogen peroxide/cyanide solution, with better results.
Tivaclean is an electrocleaning concentrate for both metals and plastics. It is an orange powder that, when mixed with water, changes to a fluorescent green to ensure full rinsing.
Platinized Titanium T-Bar Anode for Rhodium Plating. 10 1/4″ x 4″
Easy-on, easy-off, snug-fit covers protect against spills or contamination of beaker contents.
Easy-on, easy-off, snug-fit covers protect against spills or contamination of beaker contents.
This mesh style platinized titanium anode is used with rhodium plating solution or acid-based gold solutions. With proper care, this high quality anodes will last indefinitely.
Low-expansion borosilicate 3.3 glass. Designed to be heat-resistant and non-conductive. Heavy and uniform wall thickness. Easy pour spouts.
Use these sturdy shears for cutting soft wire up to 16 ga. thick and sheet up to 20 ga. thick. Sharp blades (57–59 HRC) leave a very clean edge.
Handy plier-like tools made originally for medical purposes work perfectly as clamps for small articles.
The original perfect non-scratch holder for steam and ultrasonic cleaning. Steamostats feature stainless steel box-joint construction PVC covered non-scratching tips.
100% natural beeswax supplied in a convenient 1 oz. push-up applicator tube, which makes this wax easier to use, store and less messy.
The cordless bead reamer is a great tool to smooth and enlarge bead holes. Light weight and easy to use it comes with 3 tips small pointed 45° edger and large pointed reamer.
Our universal needle file handle is made of durable plastic and shaped for comfortable use without fatigue. You can change files in seconds with a twist of the ring.
Round handle with reinforcing metal collet. Measures: 1-5/8″ x 1-3/8″.
The GemOro Testerossa features NEW ADVANCED EXCLUSIVE MOISSANITE TESTING TECHNOLOGY capable of identifying the widest range of the electrically conductive moissanite material available
Set of 12 Small Swiss Bur Set in wood stand features coarse, no-clog flutes and made of Tungsten Vanadium for years of service. Shanks are a EURO TOOL exclusive 3/32 inch for quick change handpieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
The Bench Pin Saw Vise is the perfect tool for holding metal wood or plastic for easy sawing. A necessity for the jeweler’s bench as well as for the hobbyist or craft person. Fits in standard bench slot or clamps on table.
A necessary bench accessory, bench pins are made of fine hardwoods to fit slots in work benches.
- Size: 7″ x 1-3/4″
A necessary bench accessory, bench pins are made of fine hardwoods to fit slots in work benches.
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.
Our copper pickling tweezers provide more strength than ordinary copper tweezers. Made to lift heavier objects legs are less flexible than others.
Ideal for battery clamps and screws the V-shaped notch makes it possible to hold the smallest screws for assembly or attaching battery straps in watches. Length 4-3/8.
This 5 synthetic non-conductive tweezer is ideal for changing watch batteries.
An easy-to-use stainless steel tweezer for opening small to medium split rings. Just put the split ring under the claw and squeeze.
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
Our Allegro Italian Diamond Tweezers are a reasonably priced line of tweezers which maintains a high standard of quality.
Our Allegro Italian Diamond Tweezers are a reasonably priced line of tweezers which maintains a high standard of quality.
We’ve improved our Allegro Diamond Tweezers by adding a thin layer of PVC coating to the tips for extra gripping power without damage to soft stones.
We’ve improved our Allegro Diamond Tweezers by adding a thin layer of PVC coating to the tips for extra gripping power without damage to soft stones.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair. Stainless steel, style H, length 3-1/2 inches (90mm).
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair. Stainless steel, style H, length 3-1/2 inches (90mm).
Dumont Diamond tweezers have finely serrated jaws to hold stones and small objects firmly. They’re simply the best stone tweezers in the world!
Dumont Diamond tweezers have finely serrated jaws to hold stones and small objects firmly. They’re simply the best stone tweezers in the world!