Jewelry Tools
Browse Subcategories
Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are “staple-set” into hubs to remain securely fastened until completely worn down.
Style # 6A and B20
2 rows of converging bristle.
Hub Diameter – 1-1/4″ and Tapered Arbor Hole.
Trim Length – 5/8″
Overall Diameter – 2-1/2″
You save (%)
Pink Hi-Shine
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
You save (%)
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.
You save (%)
- Overall length: 120mm (4.72″)
- Jaws: Round Nose, Very Fine
- Jaw length: 20mm (0.79″)
- Tip width: 0.7mm
You save (%)
Sheath for the inner shaft of the Grobet C300 and S-300 flexshaft.
You save (%)
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 3/32″ (2.4 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length 4″ (100 mm)
Width 1/16″ (1.7 mm)
Cut 0
You save (%)
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 2
You save (%)
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.5 mm)
Cut 2
You save (%)
Handles are knurled.
Overall length 5-1/2″ (140 mm)
Width 7/32″ (5.6 mm)
Thickness 3/64″ (1.3 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (2.0 mm)
Cut 6
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 0
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64 (2.1 mm)
Cut 2
You save (%)
Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the point. Used primarily for filing interior curved surfaces. The double radius makes possible the filing at the junction of two curved surfaces or a straight and a curved surface. Double cut on both sides.
Length: 6″ (150 mm)
Width: 5/8″ (16.0 mm)
Thickness: 11/64″ (4.5 mm)
Cut 2
You save (%)
One jaw is half-round and the other is round. Overall length is 5-1/2″.
You save (%)
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
You save (%)
Size: 5/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
You save (%)